and corrective action plans, licenses, certifications, and external reports, and conduct proactive safety hazard backssments. Ensure compliance with safety procedures and protocols and stay up to date with any changes in the regulations and industry practices with respect to EHS.
Investigate accidents to identify their causes and find ways to prevent them in the future and draft inspection reports to document inspection findings. Ensure safety recordkeeping and provide accurate reporting and metrics to support business safety initiatives. Consult and work with compliance teams on safety regulations interpretations and investigations. Additionally, drive completion of industrial hygiene
(IH) qualitative risk/personal protective equipment (PPE) backssments and provide the data for cross site use. Evaluate exposure and toxicology implications in the use of new chemicals and approve their use as appropriate.
Ensure compliance to applicable local and national IH regulatory requirements and conformance to Intel IH standards. Coordinate the monitoring of workplace environments and be responsible for the recognition, evaluation, and control of those environmental factors or stresses arising in or from the workplace that may cause sickness, impaired health, or injury among employees. Support site IH program self backssments and follow up plans and respond to customer/client
requests or events as they occur. Participate in incident investigation teams as the IH representative and represent IH in project reviews, pre startup safety reviews, and hazard reviews.
Perform onsite inspections of the existing facility and new construction to ensure compliance with all applicable codes and standards and investigate employee reports of unsafe and unhealthy working conditions. Conduct surveys of working conditions to determine the nature and magnitude of hazardous exposures and the effectiveness of existing control measures. Develop global, regional, and site industrial hygiene policies, programs, and procedural documentation based on regulatory requirements.
Qualifications Minimum qualifications are required to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. Position not eligible for Intel immigration sponsorship. Minimum Qualifications Candidate must have one of the following : The candidate must have a Bachelor's degree in any field of Engineering or relevant science applicable to the Safety or Industrial Hygiene profession and 3+ years of experience managing Safety and Industrial Hygiene programs, or The candidate must have a Master's degree in any field of Engineering or relevant science applicable to the Safety or Industrial Hygiene profession and 2+ years of experience managing Safety and Industrial Hygiene programs.
Preferred Qualifications Current Certified Safety Professional (CSP) and/or Certified Industrial Hygienist (CIH), or desire to obtain one or both certifications. 5+ years of experience in the application of sound engineering principles and technical problem-solving. Demonstrated expertise in creating internal and external reports, presentations, performing data analysis etc.
Demonstrated expertise in overseeing EHS compliance within commercial and research and development laboratory environments. Inside this Business Group As the world's largest chip manufacturer, Intel strives to make every facet of semiconductor manufacturing state-of-the-art -- from semiconductor process development and manufacturing, through yield improvement to packaging, final test and optimization, and world class Supply Chain and facilities support. Employees in the Technology Development and Manufacturing Group are part of a worldwide network of design, development, manufacturing, and assembly/test facilities, all focused on utilizing the power of Moore's Law to bring smart, connected devices to every person on Earth.
Posting Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, interaction, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, interactionual orientation, or any other characteristic protected by local law, regulation, or ordinance. Benefits We offer a total compensation package that ranks among the best in the industry.
It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here. Working Model This role will be eligible for our hybrid work model which allows employees to split their time between working on-site at their assigned Intel site and off-site. In certain circumstances the work model may change to accommodate business needs. Requisition #: JR0253949pca3lyuhf
is an internship position where you will gain experience in Datacenter GPU Platform customer enablement and support. We are committed to providing you with guidance and mentorship to help you excel in your engineering career. If you are passionate about learning platform level enablement and validation, development of tools to run validation and you want to contribute to next generation Intel Datacenter GPUs, we encourage you to apply for this internship position.
Candidate must exhibit the following behavioral traits/skills: Problem-solving and analytical skills. Communication and teamwork abilities. Length of the internship 6 months with the possibility to extend per business needs.
Qualifications Minimum qualifications are required to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates.
Requirements listed would be obtained through a combination of industry relevant job experience, internship experiences and/or schoolwork/classes/research. Minimum Qualifications: Pursuing a Master's degree in Computer Science, Computer Engineering, Electronics engineering or a related field. 6+ months of experience or course work in: Programming skills in Python and Shell scripting. Microprocessor and/or computer architecture. Version control systems (e. g.
Git). Preferred Qualifications: Academic projects related to microprocessors and/or embedded systems.
Familiar with automation framework for validation tools. Inside this Business Group The Data Center & Artificial Intelligence Group (DCAI) is at the heart of Intel's transformation from a PC company to a company that runs the cloud and billions of smart, connected computing devices. The data center is the underpinning for every data-driven service, from artificial intelligence to 5G to high-performance computing, and DCG delivers the products and technologies-spanning software, processors, storage, I/O, and networking solutions-that fuel cloud, communications, enterprise, and government data centers around the world.
Posting Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, interaction, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, interactionual orientation, or any other characteristic protected by local law, regulation, or ordinance. Benefits We offer a total compensation package that ranks among the best in the industry.
It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here. Working Model This role will be eligible for our hybrid work model which allows employees to split their time between working on-site at their assigned Intel site and off-site. In certain circumstances the work model may change to accommodate business needs. Requisition #: JR0253719pca3lyuhf
and components for the aerospace industry. If you are selected to join our team you will enjoy benefits such as quarterly bonus, medical, dental, vision, 401(k), company paid life insurance, and other great benefits! Primary Purpose: Under the supervision of the NDT Manager, Quality, the NDT Engineering Technician provides technical support to the organization, with emphasis on safety, quality, productivity, communication, continuous improvement, and ergonomics.
This position is directly tasked with supporting the Digital Technology Maintenance and Process control. Duties and Responsibilities: Write, develop and publish work instructions for all processes within the department that satisfy
the requirements of the customer (radiograph techniques), Pacific Cast Technologies, and the end user, with focus on supporting digital radiography. Research and compile data for continuous improvement and problem-solving activities, working with continuous improvement (CI) teams and leadership.
Continuously review production parts and processes to reduce costs, through ergonomic, quality and efficiency solutions. Engage in continuous improvement activities and the facilitation of these activities. Compile data and metrics to report out to leadership, the process and cost efficiency improvement. Assist in the development and implementation of NDT CI projects. Develop standards for
preventive maintenance of NDT equipment. Properly handle CR image plates (IPs).
Monitor IP scanner equipment Perform process control checks for certified individuals to evaluate. Maintain a proper IP inventory. Use laser cutter to create varied IP sizes. Create Special Cut cassettes as needed. Clean and repair screens in cassettes to maintain image quality. Clean and inspect all screens in the cassettes. Replace screens when necessary Wipe out and clean cassettes Once a month and as needed, clean, or replace IP's in the cassettes Perform Flat field checks on all IP's in service, qualify IP's in relevant software, update IP Control forms.
Perform other duties as directed. Minimum Qualifications and Experience: The implementation of lean solutions and process changes developed for digital technology applications and solutions in digital radiography. Radiography, radiographic equipment, tools and techniques, as well as inspection techniques. Effective verbal and written skills for developing technical work instructions. Effectively communicating with radiography staff to support digital processes. Performing X-Ray inspections per requirements. Writing intermediate technical work instructions for radiography applications.
Performing NDT technique evaluations, and developing improved techniques as necessary for the customer. Assisting with the design of digital part fixture concepts. Obtain Digital Level II certification within six months of start date. Demonstrate proficiency of computer applications, including Microsoft Outlook, Word, and Excel. Overcome film-based process traditions to create and implement new efficient digital technology process solutions. Assist in guiding people through change (listening, coaching and developmental communication). Develop digital x-ray technique cards and process documents.
Provide training and direction to Radiographers on continued use of digital radiography. Lead and work within a team environment. Effectively organize work and develop reprioritization solutions as needed to meet deadlines and goals. Troubleshoot computer software and equipment issues. Associates degree in a technical field is preferred. Continuous improvement experience is preferred. At least two years of radiography film or digital interpretation is required. At least two years of manufacturing or production environment experience is required. Working Conditions: Work is performed under reasonably good work conditions Frequently work near moving mechanical parts.
The physical effort applied in this job includes lifting, pulling, reaching, manipulating, carrying, pushing, or shoveling. Manufacturing requires repetitive motion of hands, wrists, and arms. Schedule: Weekend Day Shift Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly-engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large " function critical" products. CPP provides its customers with a " total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry.
More information about our company can be found at: http: /// U. S. person status is required for this position in order to comply with the Arms Export Control and Export Administration Act. U. S. persons are U. S. citizens, legal permanent residents as defined by 8 U. S. C. 1101(a)(20) or protected individuals as defined by 8 U. S. C. 1324b(a)(3). CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, interaction, interactionual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status.
This is a full time position
Professional Land Surveyor License in Oregon State or obtain within 6 months to 1 year. Licensure as a professional surveyor in the state of Oregon preferred. Land use, survey, and project management knowledge is a plus Proven working experience in land surveying Excellent knowledge of Auto CAD, Civil 3D required Project management and supervision skills Strong communication and interpersonal skills Duties and Responsibilities 4 years of survey experience.
Survey boundary analysis and computations of topography and utility surveys. Prepare and review CAD work, plats, ALTA/ACSM surveys, and final surveys. Perform quality control of all survey documents, including survey plans and record
plats. Prepare surveying estimates. Floodplain Elevation Certificates Knowledge of engineering design, land development, and construction practices. Knowledge of standard surveying methods and procedures.
Leadership and strong communication skills. Experience with conventional, Trimble GPS and Robotics data collection equipment. If you meet our criteria and possess strong organizational skills, attention to detail, and a proven track record in the field, we encourage you to apply. Send resume to: E-mail to ering or 920 SE Armour Road, Bend, OR 97702 Job Type: Full-time
new digital, analog, and mixed-signal RTL models for new and existing designs. - Running the Functional Equivalence Verification (FEV) flow to compare RTL to schematics. - Owning the creation of pre-silicon validation test plans, formal System Verilog/UVM testbenches, and validation test cases.
- Owning RTL design of new digital systems ranging from design-for-test (DFT) on existing systems to novel designs to enable Power-Performance-Area (PPA) studies on next-generation technology nodes. The ideal candidate should exhibit the following behavioral traits: - Motivated, driven, with sense of urgency and commitment to achieve targeted goals. - Communication and problem-solving skills. -
Documentation, and presentation skills. - Troubleshooting and analytical skills. This is an entry level position and compensation will be given accordignly. #Design Enablement Qualifications You must possess the below minimum qualifications to be initially considered for this position.
Preferred qualifications are in addition to the requirements and are considered a plus factor in identifying top candidates. Knowledge and/or experience listed below would be obtained through a combination of your schoolwork and/or classes and/or research and/or relevant previous job and/or internship experiences. Minimum Qualifications: Candidate must possess a BS degree with 3+ months of experience or
MS degree with 6+ months of experience in Electrical Engineering, Computer Engineering, or related fields.
Experience above is the following: - Digital design using Verilog or System Verilog. - Performing Pre-Silicon Logic Validation at Unit level or Integration level. - Experience with OVM/UVM test benches and verification concepts. - Object Oriented Programing (OOP) in any programing language, preferably in System Verilog. - System Verilog Assertions (SVA), their creation and application in closing validation coverage. - Coverage-based verification and how to leverage for efficient validation closure. Preferred Qualifications:6+ months of experience in the following: - Analog circuits and their interaction with digital systems.
- Experience in the Unified Power Format (UPF) specification. - Scripting and automation with languages such as Perl or Python. Inside this Business Group As the world's largest chip manufacturer, Intel strives to make every facet of semiconductor manufacturing state-of-the-art -- from semiconductor process development and manufacturing, through yield improvement to packaging, final test and optimization, and world class Supply Chain and facilities support. Employees in the Technology Development and Manufacturing Group are part of a worldwide network of design, development, manufacturing, and assembly/test facilities, all focused on utilizing the power of Moore's Law to bring smart, connected devices to every person on Earth.
Posting Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, interaction, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, interactionual orientation, or any other characteristic protected by local law, regulation, or ordinance.
Benefits We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here. Working Model This role will be eligible for our hybrid work model which allows employees to split their time between working on-site at their assigned Intel site and off-site. In certain circumstances the work model may change to accommodate business needs. Requisition #: JR0254379pca3lyuhf
Our experience includes system voltages from 4.16 k V through 765 k V. ECI has an immediate opening for a substation senior engineer in our Portland, OR office (physically located in Tigard, OR). Responsibilities include the conceptual, preliminary and final detailed design of new, upgraded and expanded substations, including material procurement, construction and commissioning/startup support through energization.
Engineering responsibilities include the development and delivery of physical, electrical, civil and communication design studies, calculations, drawings, exhibits and specifications. Senior engineers coordinate the completion of specialized tasks with ECI's subject matter
expert discipline groups such as Distribution Studies, Transmission Studies, Grounding Studies, Protection (relay coordination and settings), Civil Engineering, Communication (SCADA Integration), Transmission & Distribution Engineering, Environmental Planning, Surveying, Lands/Right-of-Way, and Project Management/Controls.
Diligence in the education and training of less experienced staff is an expectation. Occasional travel required. Minimum Requirements: Bachelor of Science or Master's degree in Electrical Engineering, 10+ years' project and design engineering experience, or an acceptable combination of education and experience; excellent verbal and written communication skills; strong
organization and planning skills; ability to work in a team environment; commitment to quality and accuracy; and a willingness to meet fast-paced project schedules.
A PE license is preferred. The successful applicant must have an advanced knowledge of power engineering principals, be expert regarding applicable codes, standards and design tools, possess basic project management execution skills, and have the ability to oversee and direct design personnel on a project team. Experience in utility or merchant power industry a plus. Successful applicant may be subject to client mandated drug and background checking and is required to meet the requirements of ECI's auto insurance carrier.
Applicants must not require sponsorship for employment visa status (e. g. H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include: Medical, dental and vision insurance Flexible spending account Health savings account Life insurance Disability insurance 401(k), profit sharing and employee stock ownership plan Paid vacation, personal days and holidays Paid Parental Leave Continued professional education reimbursement ECI employs over 650 engineers, designers, project managers, surveyors, right-of-way agents, environmental planners, construction professionals and support staff in 20+ engineering offices across the U.
S. ECI has over 35 years of experience in the planning, engineering and construction of a wide range of power delivery projects including substations, transmission lines, energy storage facilities, distribution systems, communication systems and industrial electrical facilities. Visit our website at . An Equal Opportunity Employer Job Posted by Applicant Pro
and have an interest in power systems, we want to hear from you. The position responsibilities include performing a variety of electrical studies that may include steady state loadflow, short circuit, transient analysis, harmonics, insulation coordination, and dynamic system response studies.
We use tools such as PSS/e, PSLF, ASPEN Oneliner, Cape, PSCAD, and EMTP-RV - experience in these not required - related experience in tools such as ETAP, SKM, Powerworld, Easypower considered applicable. Many but not all the studies will be related to large scale (50 -2000+ MW) renewable energy projects (wind, solar, energy storage). Minimum Requirements: BSEE, MSEE a plus, Engineering Physics and
Mathematics majors will be considered; entry level will be considered. Must be capable of preparing high quality written engineering reports and have excellent communication and organizational skills.
Successful applicant must meet ECI's auto insurance carrier requirements. Successful applicant may be subject to client mandated drug and background checking. Salary commensurate with experience and education. Benefits include: Medical, dental and vision insurance Flexible spending account Health savings account Life insurance Disability insurance 401(k), profit sharing and employee stock ownership plan Paid vacation, personal days and holidays Paid Parental Leave Continued professional
education reimbursement ECI employs over 650 engineers, designers, project managers, surveyors, right-of-way agents, environmental planners, construction professionals and support staff in 20+ engineering offices across the U.
S. ECI has over 35 years of experience in the planning, engineering and construction of a wide range of power delivery projects including substations, transmission lines, energy storage facilities, distribution systems, communication systems and industrial electrical facilities. Visit our website at . An Equal Opportunity Employer Job Posted by Applicant Pro
Our experience includes system voltages from 4.16 k V through 765 k V. ECI has an opening for a civil engineer in our Portland, OR office (physically located in Tigard, OR). Technical focus will be on structural engineering and/or site (civil) design for substations and power delivery facilities.
Structural engineering responsibilities include development of design criteria, structure design, foundation design, building design, and related works. Structure design primarily consists of standard shape steel structure, specification of tubular steel structures, fire walls, and related facilities. Foundation design primarily consists of drilled pier, shallow/pad, and spread footing foundations.
Civil Engineer should possess ability to learn and apply various software design packages such as Visual Analysis, STAAD. Pro, Risa, LPILE, MFAD, and CAISSON.
Site (Civil) engineering responsibilities include development of design criteria; grading & drainage design; access road design (paved and unpaved sections, vehicle maneuvering modeling, haul road analysis, etc. ); specification & design of retaining walls, perimeter walls, fences and gates; water storm drawing design; ability to specify and interpret hydrology studies; ACAD Civil 3D experience preferred. Depending on experience and interest, Civil Engineer may perform project management functions including scoping; budgeting; scheduling;
directing a team of less experienced civil engineers, designers and drafters; project monitoring & control; client interface; and project reporting.
Minimum Requirements: Bachelor of Science or Master's degree in Civil Engineering; excellent verbal and written communication skills; strong organization and planning skills; ability to work in a team environment; commitment to quality and accuracy; and a willingness to meet fast-paced project schedules. A PE license is preferred depending on experience level. The successful applicant must be knowledgeable of applicable codes, standards and design tools. The successful applicant may be subject to client-mandated drug and background checking.
Occasional travel/driving is required; therefore, the successful applicant will be subject to ECI's auto insurance carrier requirements. Applicants must not require sponsorship for employment visa status (e. g. H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include the following: Medical, dental and vision insurance Flexible spending account Health savings account Life insurance Disability insurance 401(k), profit sharing and employee stock ownership plan Paid vacation, personal days and holidays Paid Parental Leave Continued professional education reimbursement ECI employs over 650 engineers, designers, project managers, surveyors, right-of-way agents, environmental planners, construction professionals and support staff in 20+ engineering offices across the U.
S. ECI has over 35 years of experience in the planning, engineering and construction of a wide range of power delivery projects including substations, transmission lines, energy storage facilities, distribution systems, communication systems and industrial electrical facilities. Visit our website at . An Equal Opportunity Employer Job Posted by Applicant Pro
Our experience includes system voltages from 4.16 k V through 765 k V. ECI has an immediate opening for an experienced substation senior engineer in the Portland, OR office (physically located in Tigard, OR). This position will be responsible for configuring and producing engineering drawings for installation and commissioning of electro-mechanical and microprocessor type protection relay systems in high voltage substations.
These systems are used to protect and control the operation of distribution and transmission lines, medium and large power transformers, shunt capacitor banks, shunt reactors, series capacitor banks and associated electrical buses and equipment in high voltage substations
and switchyards. The successful applicant will work with design teams involved with conceptual, preliminary, and final design of station projects 4.16 k V through 500 k V.
Specific job tasks performed include producing one-line, three-line, schematic and wiring diagrams for high voltage substation projects. Diligence in the education and training of less experienced staff is an expectation. Occasional travel required. Minimum Requirements: BSEE or MSEE required; 5+ years of experience specifying, configuring and producing engineering drawings for installation and commissioning of electro-mechanical and microprocessor type protection relay systems in high voltage substations and an extensive
background in power system protection and control required.
The successful applicant must have proven experience managing a team and have excellent communication (verbal and written), organizational and writing skills. Successful applicant may be subject to client mandated drug and background checking and is required to meet the requirements of ECI's auto insurance carrier. Applicants must not require sponsorship for employment visa status (e. g. H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include: Medical, dental and vision insurance Flexible spending account Health savings account Life insurance Disability insurance 401(k), profit sharing and employee stock ownership plan Paid vacation, personal days and holidays Paid Parental Leave Continued professional education reimbursement ECI employs over 650 engineers, designers, project managers, surveyors, right-of-way agents, environmental planners, construction professionals and support staff in 20+ engineering offices across the U.
S. ECI has over 35 years of experience in the planning, engineering and construction of a wide range of power delivery projects including substations, transmission lines, energy storage facilities, distribution systems, communication systems and industrial electrical facilities.
Visit our website at . An Equal Opportunity Employer Job Posted by Applicant Pro
existing and new Process Control systems, and must be willing to work different schedules to support production needs. This includes Distributed Control Systems (DCS), Programmable Logic Controllers (PLC's), as well as custom control applications running in a MS environment which are used to meet manufacturing needs and production goals.
What You Will Do Troubleshoot to evaluate root cause and address technical issues with long term solutions in mind Develop and execute migration plans for legacy control system platforms Evaluate processes and equipment operation - work with various drives and equipment integration Plan and manage process improvement projects Read and understand
P&ID's, loop sheets, and electrical drawings Learn new programming languages and understand control loop dynamics and tuning Work with DCS and PLC platforms such as Honeywell Experion, Rockwell RS Logix 5000, Mod 300, and Modicon Perform project scope definitions and manage a wide variety of technical projects Communicate and work with various operational, environmental, maintenance, and engineering levels in a team environment yet be self-motivated and accomplish individual goals Effectively communicate with internal customers and leadership Work with a sense of urgency and customer focus mindset Who You Are (Basic Qualifications) Bachelor's Degree or higher in Engineering Four or more
years of professional experience working with DCS and PLC systems Hands-on programming experience and hardware management in industrial process control platforms and networks What Will Put You Ahead Bachelor's Degree or higher in Chemical Engineering Experience working within a Pulp and Paper operation Experience working with protocols such as Modbus, Profibus, Control Net, and/or Ethernet/IP At Koch companies, we are entrepreneurs.
This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data.
The actual amount may be higher or lower than the range provided considering each candidate's knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. Hiring Philosophy All Koch companies value diversity of thought, perspectives, aptitudes, experiences, and backgrounds. We are Military Ready and Second Chance employers. Learn more about our hiring philosophy here. Who We Are As a Koch company and a leading manufacturer of bath tissue, paper towels, paper-based packaging, cellulose, specialty fibers, building products and much more, Georgia-Pacific works to meet evolving needs of customers worldwide with quality products.
In addition to the products we make, we operate one of the largest recycling businesses. Our more than 30,000 employees in over 150 locations are empowered to innovate every day -to make everyday products even better. At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company. Our Benefits Our goal is for each employee, and their families, to live fulfilling and healthy lives.
We provide essential resources and support to build and maintain physical, financial, and emotional strength - focusing on overall wellbeing so you can focus on what matters most. Our benefits plan includes - medical, dental, vision, flexible spending and health savings accounts, life insurance, ADD, disability, retirement, paid vacation/time off, educational assistance, and may also include infertility assistance, paid parental leave and adoption assistance. Specific eligibility criteria is set by the applicable Summary Plan Description, policy or guideline and benefits may vary by geographic region.
If you have questions on what benefits apply to you, please speak to your recruiter. Equal Opportunities Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. Please visit the following website for additional information: http: ///doc/Everify. pdf #LI-SB3
and debug of complex test methods. You will analyze fault grade models of microprocessors for functional coverage gaps, work with the design RTL, micro-architecture specifications, and designers to intricately understand the details of the design in order to develop test strategies for low coverage logic.
You will write and debug assembly level functional tests to ensure high test coverage of Intel's microprocessors and prevent silicon defects from reaching our customers and help design new DFT features to enhance functional testability of Intel microprocessors. Qualifications This is an entry level position and will be compensated accordingly. You must possess the below minimum qualifications
to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates.
Experience would be obtained through a combination of prior education level classes, and current level school classes, projects, and research Minimum Requirements: The candidate must be pursuing a master's degree in Computer Enginner/EE/ Computer Science and engineering3+ months of experience or knowledge exploring the following subjects: Computer Architecture Hardware description languages (Verilog, VHDL, etc. )Programming/scripting languages (C, C++, Csharp, Java, PERL, Python, etc. )Instruction Set Architecture
(IA32, MIPS, etc. ) Logic design Inside this Business Group The Core and Client Development Group (C2DG) is a worldwide organization focused on the development and integration of SOCs, Core , and critical IPs that power Intel's leadership products, driving most of the Client roadmap for CCG, Delivering Server First Cores that enable continued growth for DCG and invest in future disruptive technologies.
Posting Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, interaction, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, interactionual orientation, or any other characteristic protected by local law, regulation, or ordinance.
Benefits We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here. Working Model This role will be eligible for our hybrid work model which allows employees to split their time between working on-site at their assigned Intel site and off-site.
In certain circumstances the work model may change to accommodate business needs. Requisition #: JR0251230pca3lyuhf
manufacturing drawing packages for HVM designs including PCB and/or mechanical assemblies using CAD. Defines and conducts feasibility studies and develops and implements test plans and parameters for new and existing module designs, including functionality validation, reliability, and safety.
Collaborates on manufacturing and test requirements for both PCB and/or mechanical assembly products in high volume. Applies knowledge to select the right components and manufacturing technologies for the module. Develops and applies computer aided design engineering methods, theories, and techniques in the investigation and solution of technical problems. Collaborates with thermal, mechanical, and
other system engineers to optimize the design parameters and deliver performance objectives. Completes physical design entry to meet both functional requirements as well as manufacturing and test requirements for PCB.
Considers BOM cost and availability data versus design tradeoffs at the board level. Collaborates with architects, other platform hardware design engineers, hardware verification engineers, technical project managers, and technicians to plan and lead platform hardware power on and debug activities. Resolves system development and bring up issues to deliver high quality boards and platforms for customers. Qualifications Minimum qualifications are required to be initially
considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates.
Minimum Qualifications: Bachelor's Degree in Electrical/Computer Engineering or Computer Science and or related field. At least three years of experience in: Allegro / Cadence (or equivalent) design tools Collaboration with multi-disciplinary team (example: packaging, thermals, mechanicals, signaling Manufacturing rules for component placement and routing. Generation of Manufacture output files (Gerbers and ODB++) Stack up definition from 4 to 16 layers using standard or HDI technology. Preferred Qualifications: Familiarity with fundamentals concepts in Electromagnetism.
Programming of MATLAB, scripting for analysis, and post-processing of data. Experience with electrical circuits and full-wave electromagnetic simulation tools. Lab measurements skills for probing and RF testing with PNA RF Test experience RF Lab equipment Knowledge/experience working with RF components such as Baluns, Filters, Splitters, Power Amplifiers, RF switches. RF metrology including VNA, Signal Generators, Signal Analyzers Knowledge of routing rules for different topologies like DDR, PCIe, SMBUS, etc. Constructing floor plan for new boards, performing routing studies (low and high-speed signals).
Defining through hole vias, blind vias, buried vias and microvias padstacks. Constraint manager definition. Component footprint creation and verification. Ability to interact directly with stakeholders such as Platform Architects, Power Delivery, Voltage Regulator (VR) designers, Signal Integrity, Mechanical, Design for Manufacturing (DFM) and Design for testing (DFT) team. Setup of artwork parameters, creation of films, drill chart, dimensions, assembly, etc. Requirements listed would be obtained through a combination of industry relevant job experience, internship experiences and or schoolwork/classes/research.
Inside this Business Group The Data Center & Artificial Intelligence Group (DCAI) is at the heart of Intel's transformation from a PC company to a company that runs the cloud and billions of smart, connected computing devices. The data center is the underpinning for every data-driven service, from artificial intelligence to 5G to high-performance computing, and DCG delivers the products and technologies-spanning software, processors, storage, I/O, and networking solutions-that fuel cloud, communications, enterprise, and government data centers around the world.
Other Locations US, AZ, Phoenix; US, CA, Folsom; US, CA, Santa Clara Posting Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, interaction, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, interactionual orientation, or any other characteristic protected by local law, regulation, or ordinance.
Benefits We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here. Annual Salary Range for jobs which could be performed in US, California: $102,120.00-$169,020.00Salary range dependent on a number of factors including location and experience Working Model This role will be eligible for our hybrid work model which allows employees to split their time between working on-site at their assigned Intel site and off-site.
In certain circumstances the work model may change to accommodate business needs. Requisition #: JR0254505pca3lyuhf
building a better tomorrow. Life at Intel Do you want to engineer the future? The E-core CPU team is powered by some of the brightest and most innovative minds in the industry and we need you. Intel is during an exciting transformation, with a vision to create and extend computing technology to connect and enrich the lives of every person.
We are designing future generations of high-performance E-core CPUs using the most advanced and innovative process technologies. This industry leading performance per watt CPU helps power the latest generation of Intel laptops and desktops, 5G base stations, micro-servers and other Artificial Intelligence and Machine Learning devices. If you are looking
to grow and develop your skillsets while be surrounded by highly motivated and knowledge teammates, then this is the organization for you. E-Core CPUs are: Powering the latest Intel 13th Generation laptops, desktops and high-end gaming platforms.
Engine that is driving 5G communications by serving as the base-station that delivers essential data from your electronic devices across the world at maximum bandwidth. Brains in Artificial Intelligence (AI) and machine learning devices. Powering the latest Google Chromebooks that is enabling a full virtual learning experience for many students. As a Formal Verification Engineer on the E-Core team you will be in charge of the verification of
arithmetic designs for future Intel E-Core products, as well of the definition and development of the verification infrastructure.
Verification of arithmetic designs for future Intel E-Core products, as well of the definition and development of the verification infrastructure. Working closely with design engineers. Daily duties will include: Technical ownership of formal verification of a microarchitecture block, methodology, or otherwise significant aspect of the CPU. Understand and contribute to micro-architecture specification and define the formal verification strategy for a significant portion of the design. Lead ROI analysis and recommend appropriate use of formal verification vs dynamic validation techniques for relevant parts of the CPU.
Document formal test plans and drive technical reviews of plans and proofs with design and architecture teams. Post-silicon failure debug and sighting resolution. Mentor junior team members. Develop validation automation tools to accelerate execution. Collaborate on validation approach and strategy beyond immediate team. Qualifications Minimum Qualifications: Ph D in Computer Engineering or Electrical Engineering with emphasis on formal verification OR M. S. in Computer Engineering or Electrical Engineering with 2+ years relevant education or work experience OR B.
S. in Computer Engineering or Electrical Engineering plus 3+ years of relevant work experience. 1+ years' experience with formal verification. 1+ years' experience with hardware development. 1+ years' experience with System Verilog. Preferred Qualifications: Knowledge of Intel Architecture ISA and system architecture, x86 assembly language. Post-silicon debug and analysis. Research publications, patent filings, or other evidence of personal technical innovation in validation methodology advancement. Amazing Benefits Here at Intel, we invest in our people.
Beyond health, dental, and retirement benefits, Intel's benefits package includes 14 paid holidays per calendar year, three weeks of paid vacation, and four-week paid sabbatical every four years of employment. Intel also offers employees five bonuses per year dependent on overall company and personal performance, and an employee stock purchase program. Find more information about our Amazing Benefits here: jobs. /benefits Inside this Business Group In the Design Engineering Group (DEG), we take pride in developing the best-in-class SOCs, Cores, and IPs that power Intel's products.
From development, to integration, validation, and manufacturing readiness, our mission is to deliver leadership products through the pursuit of Moore's Law and groundbreaking innovations. DEG is Intel's engineering group, supplying silicon to business units as well as other engineering teams. As a critical provider of all Intel products, DEG leadership has a responsibility to ensure the delivery of these products in a cost efficient and effective manner. Other Locations US, TX, Austin; US, CA, Santa Clara Posting Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, interaction, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, interactionual orientation, or any other characteristic protected by local law, regulation, or ordinance.
Benefits We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation.
Find more information about all of our Amazing Benefits here. Annual Salary Range for jobs which could be performed in US, California: $112,550.00-$185,690.00Salary range dependent on a number of factors including location and experience Working Model This role will be eligible for our hybrid work model which allows employees to split their time between working on-site at their assigned Intel site and off-site. In certain circumstances the work model may change to accommodate business needs. Requisition #: JR0254137pca3lyuhf
in progress. We are responsible for some of the world's largest and most complicated battery storage systems being constructed nationwide. Come join our cutting-edge team in Portland, OR office (physically located in Tigard, OR) for an exceptional and exciting career opportunity.
Minimum Requirements: Bachelor of Science in Electrical Engineering with experience in conceptualization, ratings and design of AC and DC cable systems, applicable code requirements and standards. Experience with software integration of BESS with solar and electrical grid is highly desired. Responsibilities include optimization of projects, calculations, physical and electrical layout. Exceptional verbal and
written communication skills; strong organization and planning skills; ability to collaborate with other discipline teams; commitment to quality and accuracy; and a willingness to meet fast-paced project schedules.
The successful applicant may be subject to client-mandated drug and background checking. Occasional travel/driving is required; therefore, t he successful applicant will be subject to ECI's auto insurance carrier requirements. Applicants must not require sponsorship for employment visa status (e. g. H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include the following: Medical, dental and vision insurance Flexible spending
account Health savings account Life insurance Disability insurance 401(k), profit sharing and employee stock ownership plan Paid vacation, personal days and holidays Paid Parental Leave Continued professional education reimbursement ECI employs over 650 engineers, designers, project managers, surveyors, right-of-way agents, environmental planners, construction professionals and support staff in 20+ engineering offices across the U.
S. ECI has over 35 years of experience in the planning, engineering and construction of a wide range of power delivery projects including substations, transmission lines, energy storage facilities, distribution systems, communication systems and industrial electrical facilities.
Visit our website at . An Equal Opportunity Employer Job Posted by Applicant Pro
Develops and implements product design, development, and validation tools and provides technical and issue resolution support during development, testing, and production. Evaluates, designs, and develops new software and hardware fixtures and utilizes tools during project deployment to validate and optimize product quality and performance.
Creates product specifications, hardware design guides, application notes, and other supporting technical collateral. Collaborates and enables internal and external silicon, hardware, and software teams to deliver latest products in the market. Partners with customer RD and manufacturing to ensure smooth product ramp through integrating customer DFx
requirements, mitigating customer factory challenges, delivering product training, and providing health oversight with rapid technical support and systematic improvement action.
Qualifications You must possess the below requirements to be initially considered for this position. Preferred qualifications are in addition to the requirements and are considered a plus factor in identifying top candidates. Experience listed below would be obtained through a combination of your schoolwork and/or classes and/or research and/or relevant previous job and/or internship experiences. Minimum Qualifications: The candidate must possess a Bachelor's degree in Electrical Engineering, Computer Science
or in related field. 2+ years of hardware debug at the component and system level, root cause analysis, corrective action.
2+ year of trouble shooting for multiple operating systems (such as Window, Linux) and their associated BIOS, Firmware, and system drivers. Preferred Qualifications: Experience working with multiple segments including server, client, and mobile; including technical understanding of the architecture and how platform HW/SW/FW work together. Experience with the Microsoft Windows Debugger, Kernel Debugger tools and/or JTAG debuggers such as ITP or LTB. Inside this Business Group Enable amazing computing experiences with Intel Software continues to shape the way people think about computing - across CPU, GPU, and FPGA architectures.
Get your hands on new technology and collaborate with some of the smartest people in the business. Our developers and software engineers work in all software layers, across multiple operating systems and platforms to enable cutting-edge solutions. Ready to solve some of the most complex software challenges? Explore an impactful and innovative career in Software. Posting Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, interaction, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, interactionual orientation, or any other characteristic protected by local law, regulation, or ordinance.
Benefits We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here.
Working Model This role will require an on-site presence. Requisition #: JR0252754pca3lyuhf
