engineer in the Production Engineering Directorate, coordinating interrelated electronic/mechanical projects. Perform as the lead project engineer for a variety of engineering/weapon overhaul programs. Apply professional knowledge such as technical judgment, originality and resourcefulness, towards the design, development, testing and modification of a variety of communication-electronic systems.
Prepare repair standards, methods, and procedures for defense systems or components. Utilize computer systems to record, transfer, control and analyze data information relating to production and testing. Requirements Conditions of Employment Direct Deposit Required. Appointment may be subject
to a suitability or fitness determination, as determined by a completed background investigation. This position requires up to 25% Business Travel (TDY). Obtain and Maintain Secret Clearance.
This is an Army Acquisition, Logistics and Technology Workforce position ( Foundational). Selectee must meet position requirements for Engineering and Technical Management certification within 36 months as of entrance on duty. Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315. Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective
Service Registration. Qualifications Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job.
You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See for an extensive list of document requirements for all employment authorities. Interagency Career Transition Assistance Plan Priority Placement Program, Do D Military Reserve (MR) and National Guard (NG) Technician Eligible Priority Placement Program, Do D Military Spouse Preference (MSP) Eligible Priority Placement Program, Do D MR and NG Preference Eligible Tech Receiving Disability Retirement Priority Placement Program, Do D Retained Grade Preference Eligible In order to qualify, you must meet the Education and Experience requirements described below.
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e. g. Peace Corps, Ameri Corps) and other organizations (e. g. professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application.
Additional information about transcripts is. Basic Requirement for Electronics Engineer: (Must Provide Transcripts) A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.
The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e. g. State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3.
Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.
g. engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e. g. in interdisciplinary positions. In addition to the competencies, to qualify based on your experience, your resume must describe at least one year of specialized experience which prepared you to do this work in this job.
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below: Specialized experience: I have one year of specialized experience which includes 1) Providing technical oversight for engineering concepts applicable to electronic systems; AND 2) Developing standards used to evaluate plans related to the overhaul of engineering/weapon systems; AND 3) Advising supervisors and production personnel on electronic engineering designs, and development issues.
This definition of specialized experience is at the GS-11 equivalent grade/pay band in the federal service. You will be evaluated on the basis of your level of competency in the following areas: General Engineering Oral Communication Planning and Evaluating Project Management How You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications above. Once the announcement has closed, a review of (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement.
If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility. You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.
Veterans and Military Spouses will be considered along with all other candidates. Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above.
Additional information about the program is on Required Documents The documents you are required to submit vary based on whether or not you are eligible for preference in federal employment. A complete description of preference categories and the associated required documents is in the. As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply.
If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further. 1. Your resume: Your resume may be submitted in any format and must support the specialized experience described in this announcement. If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy. For qualifications determinations your resume must contain hours worked per week and the dates of employment (i.
e. HRS per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as incomplete and you may not receive consideration for this position. For additional information see: 2. Other supporting documents: Cover Letter, optional Most recent Performance Appraisal, if applicable NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office. Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you.
You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U. S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
PDN-9ad3de8-8b53-f609f96277fa
or the GS-11 grade level. The full performance grade level of this position is GS-11. Duties Assist the Supervisor in short- and long-range planning of construction, alteration, maintenance, and repair projects. Assign, direct, and review the work of engineering technicians and draftsmen.
Conduct extensive project studies, including written reports of findings and recommendations, for the Facility Engineering Program. Perform Contract Officer Representative functions to include attending pre-construction conferences, and furnishing technical advice and guidance on the interpretations of contract provisions. Requirements Conditions of Employment Appointment may be subject to a suitability
or fitness determination, as determined by a completed background investigation. Complete and pass a Tier 1 National Agency Check with Inquiries (NACI) background investigation.
Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as describedin 5 CFR Part 315. Periodic overtime and/or weekend work may be required based on specific projects and work features. Qualifications Who May Apply: US Citizens In order to qualify, you must meet the education and/or requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e. g. Peace
Corps, Ameri Corps) and other organizations (e. g. professional; philanthropic; religious; spiritual; community; student; social).
You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is. Basic Requirement for Electrical Engineer : A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
ORB. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e. g. State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2.
Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4.
Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e. g. engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.
g. in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position at the GS-07, GS-09, or GS-11 grade levels you must also meet the qualification requirements listed below. GS-07 Additional Qualification Requirements : To qualify based on your experience, your resume must describe at least one year of experience which prepared you to do the work in this job. Specialized experience is defined as: performing basic electrical engineering duties to include assisting other engineers on assignments or projects related to the design, development, modification, fabrication, and testing of electrical equipment and systems.
This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05). OR One year of graduate-level education directly related to this position or superior academic achievement. OR Specialized experience, but less than one year; and less than one year of required education. GS-09 Additional Qualification Requirements : To qualify based on your experience, your resume must describe at least one year of experience which prepared you to do the work in this job.
Specialized experience is defined as: 1) Applying a range of standard electrical engineering principles, methods, and practices to complete projects of limited scope; and 2) exercising limited judgment in the selection of appropriate guidelines to apply to professional problems. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07). OR Two years of progressively higher level graduate education leading to a master's degree or master's or equivalent graduate degree directly related to this position.
OR Specialized experience, but less than one year; and less than two years or progressively higher level graduate education. GS-11 Additional Qualification Requirements : To qualify based on your experience, your resume must describe at least one year of experience which prepared you to do the work in this job. Specialized experience is defined as: 1) Exercising independent judgment in the application of established electrical engineering methods, procedures, and techniques to small routine projects, 2) preparing plans and specifications for electrical distribution and utilization systems, 3) monitoring engineering projects to ensure compliance with specifications; AND 4) conducting field studies of electrical equipment to evaluate functionality.
This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09). OR Three years of progressively higher level graduate education leading to a Ph. D. degree or Ph. D. or equivalent doctoral degree directly related to this position. OR Specialized experience, but less than one year; and less than three years of progressively higher level graduate education leading to a Ph.
D. degree. You will be evaluated on the basis of your level of competency in the following areas: Contracting/Procurement Electrical Engineering Planning and Evaluating Project Management How You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications above. Once the announcement has closed, a review of (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement.
If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility. You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation. Veterans and Military Spouses will be considered along with all other candidates.
Required Documents The documents you are required to submit vary based on whether or not you are eligible for preference in federal employment. A complete description of preference categories and the associated required documents is in the. As described above, your complete application includes your resume, your responses to the online questionnaire, and documents which prove your eligibility to apply. If you fail to provide these documents, you will be marked as having an incomplete application package and you will not be considered any further. 1. Your resume: Your resume may be submitted in any format and must support the specialized experience described in this announcement.
If your resume includes a photograph or other inappropriate material or content, it will not be used to make eligibility and qualification determinations and you may not be considered for this vacancy. For qualifications determinations your resume must contain hours worked per week and the dates of employment (i. e. HRS per week and month/year to month/year or month/year to present). If your resume does not contain this information, your application may be marked as incomplete and you may not receive consideration for this position.
For additional information see: 2. Other supporting documents: Cover Letter, optional Most recent Performance Appraisal, if applicable This position has an individual occupational requirement and/or allows for substitution of education for experience. If you meet this requirement based on education you MUST submit a copy of your transcript with your application package or you will be rated ineligible. See: NOTE: Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office.
Some supplemental documents such as military orders and marriage certificates may contain personal information for someone other than you. You may sanitize these documents to remove another person's personal information before you submit your application. You may be asked to provide an un-sanitized version of the documents if you are selected to confirm your eligibility. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U. S. Department of Education in order for it to be credited towards qualifications.
Therefore, provide only the attendance and/or degrees from. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. PDN-9acdcabc-dab6-44ec-82d4-0770ba17f7da
Engineering jobs encompass various roles focused on designing, developing, and maintaining structures, machines, devices, systems, and materials. These positions require a strong foundation in STEM (Science, Technology, Engineering, Mathematics) and often involve problem-solving, creativity, and technical expertise. Typical engineering disciplines include civil, mechanical, electrical, and chemical engineering, among others. Engineers work in diverse industries, from automotive to aerospace, construction to computing. Characteristics of engineering jobs include a blend of theoretical knowledge and practical application, a commitment to safety and efficiency, and the likelihood of collaborating across multidisciplinary teams.
