this level, projects are of moderate scope and responsibility or may be a significant portion of a major and diverse project or process; decisions are made within established guidelines and may be reviewed by supervisors and/or managers. May assign, coordinate and review portions of the work for support personnel, contractors, and suppliers.
Establishes routings, methods, layouts, tools, costs, methods documentation, quality plans and labor standards for revisions to current operations and/or new parts or programs of moderate scope. Provides support and troubleshooting for current operations. Investigates, gathers, and analyze data and implement solutions. Innovates and implements
cost reduction, quality, safety, and ergonomic improvement ideas of moderate scope. Applies electronic tools across a broad range of applications, including e-builds, modeling, and simulations.
Develops and implements plans to support lean manufacturing through the Production System of moderate scope. Designs operations layouts. Improves material flow and material presentation. Leads team studies related to capacity, energy, productivity, and efficiency of moderate scope. Leads analysis, development and implementation of new manufacturing processes and technology. Analyzes and makes modifications to existing performance pay plans; assists in development of baseline data for new
performance pay plans. Requirement Provide on-site shop floor support for production critical Factory Automation solutions and equipment that require quick response to guarantee uptime and productivity.
Be responsible for changes to control logic and software including, but not limited to relay ladder logic, PLCs, HMIs, and PC based logic. Provide electrical designs within applicable standards to build new, or modify existing, production machines and systems. Create and maintain interfaces for communicating with shop-floor tools, PLC controls, SCADA, and MES systems. Work with Quality, Manufacturing Engineering, Operations, and Factory Automation Leads to ensure manufacturing and standardization goals are achieved.
Support off-shift maintenance to troubleshoot machines and systems which may include electrical and mechanical issues. This is a Full Time, Contract opportunity. Shift: 1st Shift Duration: 12 Months Location: Waterloo IA Pay Rate: $45- $48 per hour. Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible.
Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, interaction, age, physical or mental disability, veteran status, marital status, domestic partner status, interactionual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates.
If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please click here or call (866) -898-xyz X. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.
S. C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws. Volt is acting as an Employment Agency in relation to this vacancy.
within either the enterprise product delivery process or the enterprise order fulfillment process. At this level, projects are of moderate scope and responsibility or may be a significant portion of a major and diverse project or process; decisions are made within established guidelines and may be reviewed by supervisors and/or managers.
May assign, coordinate and review portions of the work for support personnel, contractors, and suppliers. This is a full-time position that is indefinite in duration with the opportunity of professional growth, and additional opportunities within our organization. Duties: Provide on-site shop floor support for production critical Factory Automation solutions
and equipment that require quick response to guarantee uptime and productivity. Be responsible for changes to control logic and software including, but not limited to, relay ladder logic, PLCs, HMIs, and PC based logic.
Provide electrical designs within applicable standards to build new, or modify existing, production machines and systems. Create and maintain interfaces for communicating with shop-floor tools, PLC controls, SCADA, and MES systems. Work with Quality, Manufacturing Engineering, Operations, and Factory Automation Leads to ensure manufacturing and standardization goals are achieved. Support off-shift maintenance to troubleshoot machines and systems which may include electrical
and mechanical issues. Requirements: 4-year degree in technology/engineering OR 2-year degree with hands on experience in electrical or PLC Programming.
As a condition of employment consideration, Productive Resources conducts pre-employment screening, including a background check and drug test. In addition, an employment candidate is required to provide proof of identity and legal authority to work in the United States. Why work for Productive Resources? Productive Resources is a full-service engineering firm with over two decades of experience serving leading global clients. Our primary focus is on project-based product development and manufacturing engineering support.
Our primary industries of focus are off highway equipment including agricultural, construction, defense, mining, recreational, industrial, and specialty machines. We lead with our reputation for quality, teamwork, and innovative solutions which keep our clients engaged as a partner in their journey. Our diverse experience and client base will challenge your technical skills and provide greater opportunity for growth. Our primary delivery center is our Technical Center in Waterloo, IA, as well as numerous customer areas we serve with onsite and remote teams throughout the U.
S. We Offer Competitive Benefits: Health and Dental Insurance Company Paid Life Insurance Long-Term Disability Short-term Disability Retirement Savings Account (Traditional 401k & Roth 401k) Flexible Spending Plans for Medical Expenses and Dependent Care Paid Time Off (PTO) Equal Opportunity and Veteran Friendly
also be asked to help with other facilities responsibilities as needed. Responsibilities include: Sweeping, mopping, vacuuming floors (carpeted, tile, & polished cement) Dusting, wiping, & sanitizing a variety of surfaces (tables, desks, railings, etc. ) Cleaning conference rooms, & office spaces Cleaning & sanitizing bathrooms and kitchen areas Restocking disposables (e.
g. soap, paper products) Cleaning mirrors & windows Emptying trash and tidying work and office areas Wiping and cleaning mirrors and windows Maintain outer premises by cleaning entrances, weeding flower beds, etc. Assist with ice and snow management (shoveling snow from the sidewalks, applying ice melt, etc.
) Cleaning and sanitizing break areas: tables, microwaves, vending machines, refrigerators, etc. Sanitizing entrances, exits, & other commonly touched surfaces Other tasks relative to cleanliness, hygiene, and facility needs.
Emptying dumpsters on a daily-weekly basis Requirement High school diploma Previous cleaning experience strongly preferred. The ability to work safely, carefully, and thoroughly. The ability to communicate and receive communication, clearly and effectively. The ability to walk frequently throughout the day. Strong attention to detail Good physical condition The ability to lift moderately heavy loads (up to 50 lbs. ) The ability to push/pull moderately
heavy loads while walking across the facility. The ability to apply physical pressure while scrubbing/mopping/sweeping etc.
An ability to move freely without incumbrance due to the high traffic nature of the facility operations. Required: Lifting up-to 35LBS Standing for long periods of time Bending Basic computer skills Ability to work safely and efficiently. Ability to work with close tolerances. Ability to work in a team and independently. Strong attention to detail and ability to follow instruction and written processes. This is a Full Time, Contract opportunity. Shift: Shift: 1st Monday - Thursday 6:00 AM - 4:30 PM, OT hours would be on Fridays Duration: 12 Months Location: Paton Iowa Pay Rate: $18- $20 per hour.
Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Benefits: Volt offers benefits (based on eligibility) that include the following: health, dental, vision, term life, short term disability, AD&D, 401(k), Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP).
Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, interaction, age, physical or mental disability, veteran status, marital status, domestic partner status, interactionual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates.
If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please click here or call (866) -898-xyz X. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U. S. C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.
Volt is acting as an Employment Agency in relation to this vacancy.
Assist with preparation of Maintenance and Improvement Plans. Prepare activity reports and work order reports. Schedules and assists pest management companies with treatments, when needed. Maintain inventories. Assist in coordinating maintenance and repairs of heating and ventilation systems.
Ensure maintenance records are maintained. The Housing Maintenance Technician has a physically strenuous and demanding job. He/she will be lifting, pulling and managing heavy equipment and objects and must be able to climb ladders and maneuver onto roof tops and other high areas. Other duties as assigned. QUALIFICATIONS: High School diploma or GED. Must have the ability to operate the basic hand
and power tools used in construction. 3 years experience required in construction or maintenance. Must be able to work independently. Must be in good physical condition.
Must have good time management skills. Must have knowledge of carpentry and building maintenance. Prefer experience with pest management systems. Prefer knowledge of maintenance planning and administration. Prefer knowledge of HVAC, plumbing and electrical systems. Prefer experience with inspection procedures. Must have a valid driver license. SUPERVISION: Direct supervision by the Housing Director. SALARY LEVEL: Annual Salary Range: $36,545 - $49,524 Applicants will be required to submit to a background check and to a pre-employment drug test. Job Posted by Applicant Pro
structures with a safe, reliable, and cost-efficient concrete formwork solution. We do this by engineering, designing, manufacturing, supplying and field servicing forming and shoring products for concrete construction. Our Core Values represent the manner in which we expect to do business with our customers and interact with those people around us in the business community.
At EFCO, our core values are at the very heart of who we are and what we believe. Quality. Innovation. Integrity. Super Service. These 4 Core Values describe very high standards of professional behavior that all EFCO employees must seek to achieve. Job Purpose Assists with coordinating Environmental, Health, and Safety
activities for CPI and EFCO Warehouse operations. Develops and delivers company safety and training programs. Recommends new approaches, policies, and procedures to effect continual improvements in efficiency of department and services performed.
Job Responsibilities Provide technical support for environmental, health, and safety initiatives, policies, and preferred work methods through hazard backssments, job safety analysis, and site audits. Develop and deliver training on policies and procedures on compliance regulations and industry best practices. Assists with maintaining compliance with various required local, state, and federal regulations, permits, and laws including maintaining
required documentation and submitting reports. Perform various EHS tasks and lead/participate on special projects.
Conduct incident investigations, coordinate corrective actions, and assist in workers compensation program management. Assists with managing vendor and contractor safety programs and best practices. Responsible for maintaining procedures for safe handling of hazardous materials and waste. Other duties as assigned. Job Requirements Bachelor's Degree strongly preferred. Credentials related to environmental, health, and safety strongly preferred. Prior knowledge & experience with EH&S best practices required. Excellent communication, interpersonal, and organizational skills are required.
Must possess analytical and problem-solving abilities with the demonstrated ability to effectively work under pressure, exercise good judgment, and maintain confidentiality. Possesses the ability and skillset to lead organizational change. Ability to work independently and manage EHS projects. Ability to work in a heavy manufacturing environment required, including a great deal of walking and/or standing. Occasional squat, lift, push, pull, and moving of items up to 50 pounds may be necessary. Limited travel required. Why EFCO? Enjoy what you do.At EFCO, you have the ability to be involved in historic, high-profile projects!
Enjoy who you work with.A successful company starts with successful teams and team members. Enjoy who you work for. As a privately held, team member & family-owned business that offers a competitive and comprehensive compensation and benefits package. Opportunities to grow in a variety of fields with hands-on experience.
Youth Specialist at Bremwood If you have a passion for making a positive change in your community, LSI is looking for you. Our Bremwood Residential Treatment Center in Waverly has a long history of serving trauma-impacted kids in Iowa. LSI is looking for a compassionate, dedicated full-time Caseworker to empower these children toward success.
Duties The Caseworker will provide direct service to children on Bremwood's campus in several ways, including: - backssment and diagnostic skills- Treatment modalities- Crisis intervention- Case management- Advocacy Other duties may include authoring treatment plans, progress reports, and other reports that may be requested. This job is a perfect
fit for someone interested in collaboration with other LSI team members and department workers. The Caseworker also oversees treatment services provided to children on campus, which may occur outside of normal business hours.
This position is part of an on-call rotation. Salary and Benefits In addition to joining a family of caring teammates, you'll also enjoy a competitive salary and benefit package at LSI, including a 401(k), paid time off, and health, dental, life, and vision insurance. Qualifications Qualified candidates for this job will have either: - A Bachelor's degree in Social Work or a related human services field, plus two years of full-time work related experience- A Master's
degree in Social Work, Psychology, or Counseling This position requires a valid driver's license, auto insurance, and the ability to pass an extensive background check, including checks of the Dependent Adult and Child Abuse registries, the interaction Offender registry, and the criminal history check.
Who We Are LSI is an equal opportunity employer. At LSI we respect diverse life experiences, cultures and heritages, and strive to provide that all voices are heard and valued. You can learn more about our commitment to diversity, equity and inclusion at lsiowa. org/who-we-are/ Are you ready for the most challenging and rewarding adventure of your life? Join our LSI team today!
and mechanically? Are you able to work at extreme heights? Our client has an opportunity in the Riverside, MO area that we are looking to help fill with mechanically inclined individuals. Their technicians work in a safety-first type of environment and don't mind heights or working on mechanical parts.
As an Overhead Crane Service Technician , you will work with 480 3 phase motors, troubleshooting issues with their cranes, and working with clients and facility directors to ensure that their client's needs are being serviced properly. You will be home every night! Vehicle and fuel card provided. No out-of-pocket expense! Specialty tools will be provided. Technicians do need their own basic
tool set. Our client does have a discounted tool program if you need to buy additional tools/replace your own tools. This is a DIRECT HIRE opportunity.
Principal Responsibilities: Perform inspections, maintenance and repairs on electric overhead traveling cranes and hoists at varied customer locations. Be available " on call" as part of service office rotation and provide after-hours service. Conduct on-site electrical, mechanical, structural and electronic troubleshooting to determine the cause for equipment malfunction and establish the necessary repairs using visual inspection, test procedures and appropriate test equipment. Perform a general post repair audit before completion
of work, documenting that all required safety features are functional or documenting deficiencies and attaching a deficiency tag to the crane.
Follow all established safety rules and procedures, including those established by the customer. Maintain company vehicle and uniforms. Participate in monthly safety meetings. Other responsibilities as assigned by supervisor. Education: Associate degree in Industrial Electrical/Mechanical Technology or related field or equivalent vocational/technical training and experience. Experience: Minimum one (1) year experience involving electrical troubleshooting and mechanical repair Some electronic experience preferred but not necessary Experience with cranes is a benefit Other Requirements: Must have and maintain a good driving record, including a valid driver's license.
Must be willing to work off the ground. Can work varied overtime, as needed by customer, be available for " on call" as part of the service office rotation and be able to travel and work out of town, on occasion. Must be able to frequently lift up to 25 lbs. Must be able to lift up to 50 lbs. on a daily basis. Must be able to lift up to 75 lbs. although not on a daily basis. Must be able to lift 100 lbs. on a rare basis.
This position requires frequent climbing, balancing, stooping/crouching, and overhead reaching. This position requires occasional pushing, pulling, kneeling, and crawling. You will be inside approximately 90% of the time and outside approximately 10% of the time. You will be frequently exposed to heat, cold, noise and heights. Salary: $22.00 - $32.00 per hour Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. ABOUT INNOVA SOLUTIONS: Founded in 1998 and headquartered in Atlanta, Georgia, Innova Solutions employs approximately 50,000 professionals worldwide and reports an annual revenue approaching $3 Billion.
Through our global delivery centers across North America, Asia, and Europe, we deliver strategic technology and business transformation solutions to our clients, enabling them to operate as leaders within their fields. Website : / Innova Solutions is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Innova Solutions is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, interaction, age, physical or mental disability, veteran status, marital status, domestic partner status, interactionual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates.
If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please contact us at or (770) 493-xyz X.
Please indicate the specifics of the assistance needed. Innova Solutions encourages all interested and qualified candidates to apply for employment opportunities. Innova Solutions (Hire Genics/Volt) does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U. S. C. 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.
American Cybersystems, Inc is acting as an Employment Agency in relation to this vacancy. PDN-9ae3d1ab-a778-4ee9-b78f-1d861e4dfd33
development, opportunities for growth, and fun. Facility: GSS IA Red Oak Ctr Location: Red Oak, IAAddress: 201 Alix St, Red Oak, IA 51566, USAShift: 8 Hours - Evening Shifts Job Schedule: Full time Weekly Hours: 40. 00Salary Range: $24.00 - $36.00Pay Info: $6,000 Sign-On Bonus!
Department Details Competitive Compensation Direct access to your earnings daily Flexible Scheduling Options Available Fun, Family Oriented Work Environment Excellent Health, Dental and Vision Insurance Generous Shift Differentials Health Savings Account Company Matched 401(k) Retirement Plan Salary Increases Referral Bonuses Advancement Opportunities Paid Time Off Compassionate Leave Education Assistance Scholarships
and Sponsorships Continuing Education Years of Service Recognition Program Verizon and AT&T Discounts Hotel Discounts Job Summary: We are looking for a Licensed Practical Nurse (LPN) who is ready to create a caring and joyful environment for his/her residents.
LPN candidates that excel in a long-term setting tend to have a strong sense of purpose, proficiency in care delivery, effective communication skills, empathy, and an ability to maintain composure as well as support and comfort others in stressful situations. We value the knowledge and expertise LPNs can bring to our organization and encourage you to apply today. Responsibilities: Assists with formulating a plan of care for residents
and updates when necessary Provides nursing care to residents according to physician orders and regulations Observes and documents observations and care given to residents Responds promptly to resident call lights Directs and assists with resident, family/significant other education Uses standard precautions by using personal protective equipment Qualifications Graduate from an accredited practical nursing program as a Licensed Practical Nurse.
Associate degree in practical nursing is preferred. If position requires IV therapy/management skills, the following is required in North Dakota: graduation from a Board approved AASPN program where IV therapy is part of the curriculum or completion of an IV Therapy course approved by the North Dakota Board of Nursing.
Must have attended a pre-licensure nursing program that included supervised clinical experience across the life span as part of the curriculum or have had a minimum of 400 hours of experience as LPN at another facility. Specific services/positions may have additional education, training or experience requirements. Currently holds an unencumbered Licensed Practical Nurse (LPN) license with State Nursing board and/or possess multi-state licensure privileges. Obtains and subsequently maintains required department specific competencies and certifications.
Completes required annual continuing education units (CEU) and competency training requirements of the department and facility. Benefits The Good Samaritan Society offers an attractive benefits package for qualifying full-time and part-time employees. Depending on eligibility, a variety of benefits include health insurance, dental insurance, vision insurance, life insurance, a 401(k) retirement plan, work/life balance benefits, and a generous time off package to maintain a healthy home-work balance. For more information about Total Rewards, visit /benefits.
The Good Samaritan Society is an EEO/AA Employer M/F/Disability/Vet. If you are an individual with a disability and would like to request an accommodation for help with your online application, please call -xyz X or send an email to Good Samaritan Society has a Drug Free Workplace Policy. An accepted offer will require a drug screen and pre-employment background screening as a condition of employment. Req Number: R-0137281Job Function: Nursing Featured: No For more details: jobs-search. org/insurance_red-oak-c431432/lpn-licensed-practical-nurse-ft-evenings-red-oak_i1967106438
never before! Here the world's brightest minds are tackling the world's biggest challenges. If you believe one person can make the world a better place, we'll put you to work. RIGHT NOW. John Deere is an equal opportunity employer. All qualified applicants will receive consideration for employment without regards to, among other things, race, religion, color, national origin, interaction, age, interactionual orientation, gender identity or expression, status as a protected veteran, or status as a qualified individual with disability.
Primary Location: United States (US) - Iowa - Ankeny Function: Marketing / Sales Title: Cotton Product Marketing Representative - 104609 Onsite/Remote: Partial
Remote Position This position is eligible for a flexible work schedule arrangement at the present time. The arrangement may be delayed for training or other job acclimation purposes and remains subject to change.
Your Responsibilities As a Cotton Product Marketing Representative for the Cotton Harvesting Product Family located in Ankeny, IA you will. Have global responsibility for current products, working with all four regions to deliver a deeper knowledge of our cotton harvesting and technology portfolio, our customers, and the industry Work closely with our Product Manager for future products to develop Value Proposition Documents, Marketing Launch Plans, and Go-to-Market Strategies
You will also work closely with the team on annual updates, Machine Order Code Information (MOCI), and configurations by market VISA Sponsorship is NOT Available for this position What Skills You Need Passion for agricultural products and technology with the appetite to advance knowledge Strong communication and writing skills Strong collaborated skills with the ability to build strong working relationships, globally Ability to learn financial and economic concepts to support analytic and modeling Self-starter with the ability to manage multiple task Basic knowledge and experience using Microsoft tools, especially Excel and Power Point Ability to travel up to 50% internationally What Makes You Stand Out Experience within the Cotton Production System and industry Experience within Product Family Marketing Proficiency with John Deere Operation Center Advanced Excel, Power Point, and Power BI skills Education Ideally you will have a degree or equivalent related work experience in the following: Bachelors Degree in a Marketing/Management discipline or Agricultural related field or equivalent related work experience What You'll Get At John Deere, you are empowered to create a career that will take you to where you want to go while working in an inclusive team environment.
Here, you'll enjoy the freedom to explore new projects, the support to think outside the box and the advanced tools and technology that foster innovation and achievement. Additionally, we offer a comprehensive reward package to help you get started on your new career path, including: Flexible work arrangements Highly competitive base pay and performance bonuses Savings & Retirement benefits (401K and Defined Contribution) Healthcare benefits with a generous company contribution in the Health Savings Account Adoption assistance Employee Assistance Programs Tuition assistance Fitness subsidies and on-site gyms at specific Deere locations Charitable contribution match Employee Purchase Plan & numerous discount programs for personal use Follow this link to learn more about our Total Rewards Package bit.
ly/3XCd8f L The information contained herein is not intended to be an exhaustive list of all responsibilities and qualifications required of individuals performing the job. The qualifications detailed in this job description are not considered the minimum requirements necessary to perform the job, but rather as guidelines. The terms of the applicable benefit plans, and all company actions administering or interpreting these plans, continue to control.
Deere & Company reserves the right to suspend, amend, modify, or terminate the Plan(s) in any manner at any time, including the right to modify or eliminate any cost-sharing between the company and participants. Changes, which can be made at any time, are made by action of the company's board of directors, or to the extent authorized by resolution of its board of directors, or by the Deere & Company Compensation Committee. In the event of a conflict between the language of the official Plan Documents and this document, the language of the official Plan Documents will control.
ACA Section 1557 Nondiscrimination Notice The John Deere Health Benefit Plans for Salaried Employees and The John Deere Benefit Plan for Wage Employees comply with applicable Federal civil rights laws and do not discriminate on the basis of race, color, national origin, age, disability, or interaction.
phases company processes. Requirements: Bachelors degree in Quality Sciences, Engineering or comparative work in a technical field. 5-7 years of experience in Quality Management leadership and Quality Engineering in a manufacturing or process environment. Strong preference for quality-related experience in a manufacturing/foundry environment Demonstrated experience in the effective use of quality core tools (APQP, PPAP, FMEA, MSA, SPC, etc.
). Experience in deploying statistical quality methods (sampling plans, DOE, Cpk, etc. ) Understanding of metrology, with the ability to utilize several types of measuring devices such as calipers, micrometers, hardness testing, x-ray and coordinate
measuring machine (CMM). Experience with destructive and non-destructive tests on materials and parts to measure performance, life, or materials characteristics.
Ability to interpret engineering drawings, schematic diagrams or formulas and confer with management or engineering staff to determine quality standards. ISO9001 Quality Management System leadership experience. ASQ Quality Engineer certification a plus. Six Sigma Green or Black Belt Certified a plus. Experience with ISO14001, ITAR, AS9100, TS16942, ISO14981 quality systems. Experience with continuous improvement processes i. e. six sigma, kaizen, lean, etc. SALARY: $90-120K
Qualifications No prior experience required; however, prior customer service and/or retail experience is a plus Work a schedule reflective of availability established at the time of hire, with the ability to increase hours based on business needs which may include weekends and/or holidays Physical Requirements Stand for up to 8 hours Carry up to 40 pounds Climb and balance on ladders Bend at the waist Lift up to 40 pounds Kneel and squat on the ground Reach above the shoulder frequently WORK SCHEDULE REQUIREMENTSPart-Time Sales Associates work a schedule reflective of availability established at the time of hire, with the ability to increase hours based on business needs which may include weekends
and/or holidays.
Additional Information WE OFFER 401k Competitive Benefits Package Casual Dress Code Merchandise Discount Great Work Culture The Part Time Sales' anticipated pay range is $7.25 - $12.00 per hour, with the potential to earn discretionary bonuses.
This pay range is provided in compliance with state specific laws. Actual wages may vary within this range based on the market, store location, and the Applicant's level of experience. For more details: jobs-search. org/seasonal-sales_dubuque-c431489/seasonal-sales-dubuque-ia-dubuque_i1957910908
miles + great pay OTR - Lots of miles, great pay + amazing opportunities to travel coast to coast Local - Home every day, flexible scheduling + great pay Hiring Truck Drivers: Owner Operator Solo Team Lease-Purchase Tanker Flatbed Many carriers offer the following benefits: Weekly pay Health benefits Bonuses 401K Participation Paid Vacation & Flexible Home Time Drivers applying with Live Trucking are finding better rates, running lanes, more miles, and a better quality of living.
Apply today to get in touch with the best carriers out there! by Jobble Associated topics: cdl a operator, contractor, flatbed owner operator, independent, lp program, own truck, own truck driving, own your own truck, owner operator, owner operator truck
miles + great pay OTR - Lots of miles, great pay + amazing opportunities to travel coast to coast Local - Home every day, flexible scheduling + great pay Hiring Truck Drivers: Owner Operator Solo Team Lease-Purchase Tanker Flatbed Many carriers offer the following benefits: Weekly pay Health benefits Bonuses 401K Participation Paid Vacation & Flexible Home Time Drivers applying with Live Trucking are finding better rates, running lanes, more miles, and a better quality of living.
Apply today to get in touch with the best carriers out there! by Jobble Associated topics: cdl a owner, flatbed owner operator, independent, independent contractor, lp program, own your own, own your own new truck, owner operator driver, owner operator driving, solo driver
program Medical, dental & vision benefits 401(k) with company match Requirements : CDL-A 12 months recent and verifiable tractor/trailer experience Tanker, Hazmat, & TWIC required Call a recruiter today to learn more! Associated topics: choferes clase a, class a driver, company truck driver, company truck driving, dedicated truck driver, hazardous material, otr driver, over the road driver, regular home time, tanker truck driving
food processing, commercial product development, and distribution. Summary Under general direction, the Operations Support performs a variety of job responsibilities which may include delivery of fertilizer and chemical products to customers from the retail office, customer service, vehicle maintenance, equipment and facility maintenance work, and fertilizer blending.
Key Responsibilities Performs varied responsibilities such as: equipment and plant maintenance including welding, pump and engine overhauls, painting, and general housekeeping responsibilities; loading and delivering fertilizer and chemicals to customers; operating equipment to blend fertilizer; monitoring product application
by calculating amounts, calibrating equipment, controlling application rates, and cleaning and storing equipment after application process; receiving and unloading product and performing warehouse inventory and storage functions.
Responsible for keeping a clean, orderly vehicle and organizing the warehouse and yard materials. Ensure the proper loading and operations of vehicles in compliance with DOT, OSHA and Hazmat regulations. Comply with all company and customer safety requirements. Miscellaneous duties such as assisting with special projects, attending training sessions, providing back-up when needed, and other work-related duties as assigned by supervisor/manager. Promote and live
the Simplot brand to our customers, employees and community as the best-in-class Agricultural distributor.
Responsible for accurate, timely, and safe product deliveries and where applicable, product application. Disclaimer ‑ The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Typical Education High school diploma or general education degree (GED) Relevant Experience 1+ years related experience and/or training Knowledge of basic farm equipment and operation preferred Ability to do a variety of tasks in succession, i.
e. blending products together, loading a truck, and driving the truck to a farm. Ability to accurately and safely operate heavy equipment such as a sprayer/applicator and semi-truck and trailer. Ability to use a computer, including Microsoft Office Suite and Outlook – or mobile app. Ability to learn and manipulate company software. Ability to effectively communicate both orally and in writing with management, other team members, and customers. Required Certifications Class A Commercial Driver's License (CDL) Haz Mat Endorsement Tanker Endorsement Applicators license desired Other Information Combination of education, training and/or experience will be considered for this position.
This position is not eligible for relocation. Job Requisition ID : 14067 Travel Required : None Pay Grade: Global Grade 1 Location(s) : SGS Retail - Hampton Country: United States The J. R. Simplot Company is proud to be an Equal Opportunity Employer and will consider all qualified applicants for employment without regard to race, color, religion, national origin, ancestry, age, interaction, gender, gender identity, gender expression, genetic information, physical or mental disability, medical condition, interactionual orientation, military or veteran status, marital status, or any other protected status.
