Must be at least 18 years of age. Must have a high school diploma or its equivalent (GED). Three years or more experience in Custodian work Able to lift 50lb Hours: 12- 26 Flexibility to design scheduled hours Sat and Sun. ; Hours 8:00 - 3:00 or 2:00p. m. - 9:00p. m. Filling in for other positions when not covered possible additional of 250 hours.
surfaces. Housekeeper must be knowledgeable in the proper use and safety of cleaning products. Dusting and Polishing Furniture and other woodwork in each room must be dusted regularly. Additionally, applying furniture polish to certain items may be required.
Light fixtures and ceiling fans also must be dusted. Sweeping, Vacuuming, and Mopping Depending on the floor surface, sweeping, vacuuming, or mopping may be needed. At times, carpets may need to be shampooed. Organizing and Stocking Hotels provide various items to their guests for convenience, such as soap, shampoo, conditioner, lotion, coffee and tea supplies, and stationery. Housekeepers must know which items should be in each room
and restock them as needed. Changing Linens and Towels Housekeepers must remove soiled linens and towels from the room, replacing them with clean items. This requires putting clean sheets on all beds in the room and replacing bathroom towels with a sufficient type and quantity.
Waste Removal Removing waste from wastebaskets and ashtrays and disposing of it properly. Transport garbage containers from kitchen and work areas to dumpster; empty and clean according standards. If the waste is hazardous, requires following Occupational Health and Safety rules and regulations for disposal. Adhere to recycling regulations. Maintain Cleanliness of all Dining Utensils Responsible for making sure
all plates, glasses, bowls and silverware are perfectly cleaned between uses by using an industrial dishwasher and then hand polishing to remove leftover smudges.
Stock kitchen lines with designated cleaned wares, utensils and equipment. Clean spills in kitchen and work area immediately. Clean and sanitize pots, pans, utensils and other kitchen equipment. Maintain Cleanliness of Kitchen and Storage Areas Make sure the kitchen and storage areas are kept clean at all times. This includes cleaning industrial kitchen appliances, such as stoves, grills, freezers and ovens etc. Organize and restock work areas for the next shift as specified in departmental standards.
The kitchen must meet health and safety standards at all times. Assist With Food Storage, Rotation and Preparation Responsible for food preparation. This includes things like preparing fresh salads, grilling, garnishing dishes and adding fresh salt or pepper according to customer taste. Qualifications: To perform this job successfully an individual must be able to perform each essential duty to a satisfactory standard. The requirements listed below are representative of the knowledge skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Essential: Ability to communicate in English with guests, co-workers and management to their understanding Ability to count Ability to read and write legibly Ability to work cohesively with co-workers as part of a team Ability to communicate in a second language, preferably Spanish Familiar with proper sanitation regulation Knowledge of proper chemical handling Education: A high school education or its equivalent preferred. Experience: Previous experience within the hospitality industry preferred. Basic Expectations: Have a high degree of self-motivation and the ability to work independently.
Ability to work under pressure in a demanding environment. Bright and organized, detail oriented, confident and efficient person with great people skills and a can-do attitude. Reasoning Ability: Must be able to apply common sense to carry out simple written or verbal instructions. Must be able to work with minimum supervision. Physical Aspect of Position include but are not limited to the following: Constant standing and walking throughout Frequent lifting, pushing, pulling and carrying from 25-60 lbs. Must be able to bend, stoop, squat, keeling and stretch to fulfill cleaning task Occasional ascending or descending ladders, stairs and ramps Requires reaching with hands and arms and often stop, kneel, crouch or crawl Requires grasping, writing, standing, sitting, walking, repetitive motions, bending, climbing, listening and hearing ability and visual acuity Perform other duties as requested This is a full-time position, and as such, hours and days to work WILL fluctuate up to and including weekend and holidays.
standards, and for representing the company to the customer in a professional manner that promotes good long-term relationships. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Be courteous, neat, clean, and in uniform at all times. Complete necessary repairs and maintenance in a professional & profitable manner. Ask for help if a problem cannot be found within a reasonable length of time (usually one (1) hour for residential, two (2) hours for commercial) after arrival. Adhere to proper procedures in the use of paperwork (time cards, work orders, return material tags, etc. ) and electronic devices.
Fill out paperwork for both service and Preventive maintenance before leaving the job. Turn in paperwork to the Commercial Service delivery courier. Collect C. O.
D. payments from customers according to service department policy. Inform coordinator of whereabouts at all times. Maintain service truck inventory according to the standard service truck inventory list. Notify dispatcher of parts needed for completion of a job. Maintain vehicle organization & appearance, both inside and out on a weekly basis. Report any mechanical problems to the vehicle maintenance coordinator. Maintain and protect company assigned tools and report any deficiencies to the Commercial Service Manager or P. M.
Field Supervisor. Coordinate with the Commercial Service Manager or CSC in matters that may be beyond authority or ability to handle.
Available for after-hours emergency service and the on-call schedule. Commit to involving customers in company service agreement programs. Promote sales of new equipment and accessory items. Follow EPA and company CFC policies. Perform other duties as assigned. Required Skills/Abilities Excellent verbal communication and customer service skills. Ability to work without close supervision. Previous experience troubleshooting electrical and mechanical systems. Experience in refrigeration pipefitting and installation. Good mechanical skills required.
Ability to perform the job in a neat, professional manner. Minimum Requirements High school diploma. Trade School or equivalent. Complete a minimum of 30 hours continuing education annually. Minimum Type I and II C. F. C. certification. N. A. T. E. certified for Core, preferred Specialty as well. Must gain knowledge and training to become a service technician. Physical Demands and Working Conditions Physically able to perform the work by lifting at least 60 pounds overhead. Must not be afraid of heights. Able to set up and climb ladders up to 40 feet. Able to perform work outside in temperatures 0 to 110 degrees.
Required to work on AC/AD voltage from 1 m. a. -500 volts. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.
basis to clear debris, correct minor problems and note/report areas of concern Perform make-ready assignments in vacated apartments Properly clean, maintain, and secure company-owned equipment Participate in regular safety inspections, fire drills, emergency evacuation drills, etc.
regularly Rotating evening and weekend on-call duty: must be able to report to the community as needed while on call. REQUIRED QUALIFICATIONS: General maintenance experience required Make-ready experience preferred Own/provide your own basic hand tools HVAC experience/training Valid driver’s license Excellent time management skills and ability to work independently Ability to communicate effectively with residents,
team members, family members, and outside contacts Experience maintaining swimming pools preferred Certification in one or more of the following is preferred: CPO, electrical and/or EPA.
Bilingual English-Spanish a plus. BENEFITS: Paid Time Off Health insurance Vision insurance Dental insurance 401(k) Paid holidays Bereavement leave FMLA Tuition reimbursement Discounted long-term care
in good working order, making repairs/adjustments as needed. Other Duties as Assigned Essential Functions: Maintain standards of food plant sanitation in all production activities. Ensure good manufacturing practices are adhered to at all times Adhere to the company’s production standard operating procedures Maintain a clean work area at all times Position Qualifications Project management – Ability to organize and direct a project to completion Decision Making – Ability to make critical decisions while following company procedures.
Detail Oriented – Ability to pay attention to the minute details of a project or task. Accurate – Ability to perform work accurately and thoroughly. Initiative
– Ability to make decisions or take actions to solve a problem or to reach a goal. Reliability – The trait of being dependable and trustworthy. Self Motivated – Ability to be internally inspired to perform a task to the best of one’s ability using his or her own drive or initiative Problem Solving – Ability to find a solution for or to deal proactively with work-related problems Education: High School Graduate or General Education Degree (GED) Experience: One to two years’ related experience.
Experience in food processing helpful. Physical Abilities Lift/Carry Stand: C (Constantly) 1 lbs. or less: F ( Frequently)Walk: F (Frequently) 2 – 20 lbs: F (Frequently)Sit: (F (Frequently) 21-50
lbs: F(Frequently)Handling/Fingering: F(Frequently) 51-Over 100 lbs: O(Occasionally)Reach Outward: F(Frequently) Reach Above Shoulder: F (Frequently)Climb: F (Frequently)Squat or Kneel: F (Frequently) Bend: F (Frequently) Push/Pull 1 lb.
or less: F (Frequently) 2-12 lbs: F (Frequently) 13-25 lbs: F (Frequently) 26-40 lbs: F (Frequently) 41-100 lbs: O (Occasionally) Other Physical Requirements Vision (Near) Sense of touch Ability to wear Personal Protective Equipment (PPE) (Hearing, Vision, & Lifting Equipment) WORK ENVIRONMENT While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to hot and/or humid conditions, fumes or airborne particles, risk of electrical shock and vibration.
The noise level in the work environment is usually loud.
the maintenance of all public and common areas of the property in a clean, neat, attractive manner. Attend and participate in FAM, LLC technical training from Regional Maintenance Coordinator programs as required to maintain personal and professional skill level.
Complete assigned service requests and repairs correctly and in a timely manner. Maintain and repair irrigation (as defined by supervisor). Remove trash and debris from vacated units. Perform minor carpentry repairs. Replace smoke detector batteries and a/c filters. Remove nails, hooks, etc. from ceilings and walls. Clean spills and/or over-sprays. Caulk and seal around windows, sink areas, and bathtubs/showers. Repair/replace
damaged sheetrock. Clean paintbrushes and other items once paint job is complete. Repair foundation/sidewalks. Perform landscaping duties. Pool care (as defined by supervisor).
Remove ice and snow as needed. Abide by the company’s hazardous communication program and follow correct, safe work practices at all times. All other tasks as defined by supervisor. KNOWLEDGE, SKILLS, ABILITIES Ability to maintain a friendly, professional attitude with prospects and residents. Strong customer service skills. Mold awareness. Asbestos awareness (if required). Knowledge of major appliances. Ability to work scheduled hours on a consistent basis and overtime as requested – 40 hours/week, Monday - Friday
QUALIFICATIONS No specific level of education is required. However, for safety and productivity reasons, the position requires the ability to read and write English or supervisor must verify the understanding of direction by physical observation.
No previous experience is required. TOOLS, EQUIPMENT & SUPPLIES USED Position requires individuals to be able to provide and use general maintenance equipment including, but not limited to: hand tools, pressure washers, shampooers, blowers, sandblasters, ladders, landscaping equipment and required safety equipment as outlined in the company’s safety policies. Position requires individuals to wear company specified maintenance uniform apparel and safety equipment as required.
PHYSICAL DEMANDS Ability to transport a minimum of 50 pounds variable distances. Mobility and flexibility to use ladders and to access and work in confined spaces or at heights in excess of nine (9) feet. Ability to work outdoors in temperatures exceeding 90 degrees or below 32 degrees Fahrenheit. Ability to personally perform general maintenance tasks without endangering themselves, residents, or fellow associates. This is not necessarily an exhaustive list of all responsibilities, skills, duties, requirements, efforts or working conditions associated with the job.
While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job when circumstances change; e. g. emergencies, rush jobs, changes in personnel, workload, technological developments, etc. All employment decisions, including promotions, transfers and others, are based on meeting all requirements herein and on organizational need, the employee being in good standing, (including lack of disciplinary actions) and meeting all applicable performance/other criteria. The methods of fulfilling requirements are subject to possible modification to reasonably accommodate qualified individuals with disabilities.
Some requirements, however, may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or others. THIS DOCUMENT DOES NOT CREATE AN EMPLOYMENT CONTRACT, IMPLIED OR OTHERWISE. FORESIGHT ASSET MANAGEMENT, LLC MAINTAINS AN " AT WILL EMPLOYMENT" RELATIONSHIP WITH EMPLOYEES. This means that either the employee or the employer may terminate the employment relationship with or without cause and with or without notice. Regional Manager – Clarece Mitchell Email Address: Clarece. Mitchell @
technical skills and training to the maintenance team. Maintain hazard communications program. Teach and promote safe work practices. Attend and participate in technical training programs to maintain personal skill level. Personnel Management Responsible for recruiting, hiring and quality of staff and recommend promotions and terminations when necessary.
Communicate professionally and delegate effectively with staff members. Document all counseling sessions. Ensure the staff is motivated and functions as an effective team. Comply with all personnel management policies and procedures. Develop staff through continuous motivation and training. Administrative Adhere to budget guidelines and
obtain competitive bids on major expenses. Purchase supplies as necessary using standard purchase order system and proper bidding procedures. Prepare staffing schedules consistent with property needs.
Monitor inventory of parts and supplies and appropriate levels. Participate in Company meetings, as required. Quality Control Ensure that the physical condition of the property is maintained according to Company operating and safety standards. Organize and prioritize service requests and ensure all service requests and repairs are made correctly and in a timely manner. Oversee completion of service requests in 24 hours or per property policy. Inspect grounds, buildings and other property
features as required to minimize liability concerns. Oversee turnkey operations and ensuring that vacants are made rent-ready in a timely manner.
Maintain an effective preventative maintenance program. Maintain an organized, clean and safe work area. Ensure adherence to the Company’s safety and hazard communications programs, policies and procedures. Teach and promote safe work practices to staff. Customer Service Maintain a high level of customer service. Communicate effectively with residents, fellow associates, vendors and supervisors. Knowledge, Skills, Abilities Must be able to diagnose problems and repair the following: Major appliances HVAC (EPA Certification) Basic – Intermediate plumbing Basic – Intermediate electrical (when no license required) Sheetrock General carpentry Pool care (if required by property) Roof and gutter repair Wallpaper/painting Foundation/sidewalk repairs Irrigation and maintenance repairs Landscaping Ice and snow removal In addition, the position requires the following skills: Ability to deal well with people Good verbal communication skills Strong customer service skills Licenses EPA certification, Type I and II Valid driver’s license and current automobile insurance Other licenses and certifications as required by state or federal law.3 Training Attend and participate in the FAM, LLC technical training from Regional Maintenance Coordinator programs as required to maintain personal and professional skill level.
Attendance The position requires ability to work 40 hours per week. Weekends as circumstances warrant; on-call on a rotating basis and for emergencies. Required Education and Experience No specific level of education required. Minimum three (3) years’ previous experience in property management maintenance, other building maintenance or related trade. Older properties (5+ years) may also require previous renovation experience.
Physical Requirements Lead Maintenance will spend 90 to 95 percent of their time performing hands-on repairs/maintenance work. The remaining time will be spent supervising the work of other employees and outside contractors. The position requires ability to transport or move up to 50 pounds variable distances; the mobility and flexibility to use ladders and to access and work in confined spaces or at heights in excess of nine feet; the ability to work outdoors in temperatures exceeding 90 degrees or below 32 degrees Fahrenheit. Ability to personally perform general maintenance repair tasks without endangering themselves, residents or fellow employees.
Working Conditions/Tools Required The position requires employees s to furnish their own tools and vehicle to perform daily routine tasks around the property. Persons must be able to drive the vehicle without jeopardizing the safety of residents and fellow employees. The position requires employees to be able to use general maintenance equipment including, but not limited to: hand tools, power tools, ladders, dollies, jacks, motors, pumps, compressors, blower equipment, augers, calipers, volt meters, testing meters, refrigerant, recovery units, landscaping equipment, vacuum pump, pool chemicals and required safety equipment, etc.
The position requires individuals to wear company specified maintenance uniform apparel and safety equipment as required.
purchase order system and proper bidding procedures. Under the supervision of the Maintenance Lead, prepare staffing schedules consistent with property needs. Assist Maintenance Lead with monitoring inventory of parts and supplies and appropriate levels.
Participate in company meetings, as required. Work with the Maintenance Lead to ensure that the physical condition of the property is maintained according to company operating and safety standards. Assist the Maintenance Lead with organizing and prioritizing service requests and ensure all service requests and repairs are made correctly and in a timely manner. Help the Maintenance Lead oversee completion of service requests in 24 hours
or per property policy. Work with the Maintenance Lead to ensure excellent curb appeal at all times. Inspect grounds, buildings and other property features as required to minimize liability concerns.
Assist Maintenance Lead with overseeing turnkey operations and ensuring that vacant are made rent-ready in a timely manner. Work with Maintenance Lead to maintain an effective preventative maintenance program. Maintain an organized, clean and safe work area. Ensure adherence to the company’s safety and hazard communications programs, policies and procedures. Teach and promote safe work practices to staff. Maintain a high level of customer service. Communicate effectively with residents, fellow
associates, vendors and supervisors. Assist the Maintenance Lead with department personnel management functions and budgeting as required.
Must be able to diagnose problems and repair the following: Major appliances HVAC (EPA Certification) Basic – Intermediate plumbing Basic – Intermediate electrical (where no license required) Sheetrock General carpentry Pool care (if required by property) Roof and gutter repair Wallpaper/painting Foundation/sidewalk repairs Irrigation maintenance and repairs Landscaping Ice and snow removal Knowledge, Skills, Abilities Ability to deal well with people Good verbal communication skills Strong customer service representation Required Education and Experience EPA certification, Type I and II HVAC Certified Valid driver’s license and current automobile insurance Other licenses and certifications as required by state and federal law.
Attend and participate in Foresight technical training from Regional Maintenance Coordinator programs as required to maintain personal and professional skill level. Ability to work any of the seven days of the week, 52 weeks of the year. Due to the property staffing limitations it is extremely critical that individuals possess the ability to work their scheduled hours on a consistent basis and overtime hours when requested.
Ability to serve on-call, as scheduled or as necessary. Physical Requirements Maintenance technicians will spend 90 to 95 percent of their time performing hands-on repairs/maintenance work. The remaining time will be spent supervising the work of other associates and outside contractors in the absence of the Maintenance Lead. The position require the ability to transport or move up to 50 pounds variable distances; the mobility and flexibility to use ladders and to access and work in confined spaces or at heights in excess of nine feet; the ability to work outdoors in temperatures exceeding 90 degrees or below 32 degrees Fahrenheit.
Ability to personally perform general maintenance repair tasks without endangering themselves, residents or fellow associates. Working Conditions/Tools Required The position requires associates to furnish their own tools and vehicle to perform daily routine tasks around the property. Persons must be able to drive the vehicle without jeopardizing the safety of residents and fellow associates. The position requires associates to be able to use general maintenance equipment including, but not limited to hand tools, power tools, ladders, dollies, jacks, motors, pumps, compressors, blower equipment, vacuum pump, pool chemicals and required safety equipment, etc.
The position requires individuals to wear company specified maintenance uniform apparel and safety equipment as required.
It’s just the starting point of your career, so launch your future with us! Essential functions and responsibilities of the position may vary by Aramark location based on client requirements and business needs. Job Responsibilities • Ensure guest satisfaction by maintaining all dishes, pots, pans, silverware, glasses, equipment, and kitchen utensils are cleaned and sanitized • Maintains dishwashing station, three compartment sink and related areas cleaned • Ensures equipment is clean and in working condition; reports any issues to management • Performs other light maintenance and custodial tasks • Maintains excellent customer service and positive attitude towards guest, customers, clients, co-workers,
etc.
• Adheres to Aramark safety policies and procedures including proper food safety and sanitation • Ensures security of company assets At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers.
In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. Qualifications • Demonstrates an understanding of basic sanitation procedures • Must be able to follow basic safety procedures due to exposure to hazardous chemicals • Must be available to work flexible hours including evenings and weekends This role may have physical demands including, but not limited
to, lifting, bending, pushing, pulling and/or extended walking and standing.
This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Education About Aramark Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, interaction, gender, pregnancy, disability, interactionual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law.
About Aramark The people of Aramark proudly serve millions of guests every day through food, facilities, and uniform services in 19 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential.
Learn more about working here at http: // or connect with us on Facebook , Instagram and Twitter.
as necessary using standard purchase order system and proper bidding procedures. The Maintenance Lead will monitor inventory of parts and supplies and appropriate levels. Participate in company meetings, as required. The the Maintenance Lead will ensure that the physical condition of the property is maintained according to company operating and safety standards.
the Maintenance Lead will organize and prioritize service requests and ensure all service requests and repairs are made correctly and in a timely manner. the Maintenance Lead will ensure excellent curb appeal at all times. Inspect grounds, buildings and other property features as required to minimize liability concerns. Lead will
oversee and participate in turnkey operations, ensuring that vacant are made rent-ready in a timely manner. Maintenance Lead will maintain an effective preventative maintenance program.
Maintain an organized, clean and safe work area. Ensure adherence to the company’s safety and hazard communications programs, policies and procedures. Teach and promote safe work practices to staff. Maintain a high level of customer service. Communicate effectively with residents, fellow associates, vendors and supervisors. Must be able to diagnose problems and repair the following: Major appliances HVAC (EPA Certification) Basic – Intermediate plumbing Basic – Intermediate electrical (where no license
required) Sheetrock General carpentry Pool care (if required by property) Roof and gutter repair Wallpaper/painting Foundation/sidewalk repairs Irrigation maintenance and repairs Landscaping Ice and snow removal Knowledge, Skills, Abilities Ability to deal well with people Good verbal communication skills Strong customer service representation Required Education and Experience EPA certification, Type I and II Valid driver’s license and current automobile insurance Other licenses and certifications as required by state and federal law.
Attend and participate in Foresight technical training from Regional Maintenance Coordinator programs as required to maintain personal and professional skill level.
Ability to work any of the seven days of the week, 52 weeks of the year. Due to the property staffing limitations it is extremely critical that individuals possess the ability to work their scheduled hours on a consistent basis and overtime hours when requested. Ability to serve on-call, as scheduled or as necessary. Physical Requirements Maintenance technicians will spend 90 to 95 percent of their time performing hands-on repairs/maintenance work. The remaining time will be spent supervising the work of other associates and outside contractors in the absence of the Maintenance Lead.
The position require the ability to transport or move up to 50 pounds variable distances; the mobility and flexibility to use ladders and to access and work in confined spaces or at heights in excess of nine feet; the ability to work outdoors in temperatures exceeding 90 degrees or below 32 degrees Fahrenheit. Ability to personally perform general maintenance repair tasks without endangering themselves, residents or fellow associates. Working Conditions/Tools Required The position requires associates to furnish their own tools and vehicle to perform daily routine tasks around the property.
Persons must be able to drive the vehicle without jeopardizing the safety of residents and fellow associates. The position requires associates to be able to use general maintenance equipment including, but not limited to hand tools, power tools, ladders, dollies, jacks, motors, pumps, compressors, blower equipment, vacuum pump, pool chemicals and required safety equipment, etc. The position requires individuals to wear company specified maintenance uniform apparel and safety equipment as required.
technical skills and training to the maintenance team. Maintain hazard communications program. Teach and promote safe work practices. Attend and participate in technical training programs to maintain personal skill level. Personnel Management Responsible for recruiting, hiring and quality of staff and recommend promotions and terminations when necessary.
Communicate professionally and delegate effectively with staff members. Document all counseling sessions. Ensure the staff is motivated and functions as an effective team. Comply with all personnel management policies and procedures. Develop staff through continuous motivation and training. Administrative Adhere to budget guidelines and
obtain competitive bids on major expenses. Purchase supplies as necessary using standard purchase order system and proper bidding procedures. Prepare staffing schedules consistent with property needs.
Monitor inventory of parts and supplies and appropriate levels. Participate in Company meetings, as required. Quality Control Ensure that the physical condition of the property is maintained according to Company operating and safety standards. Organize and prioritize service requests and ensure all service requests and repairs are made correctly and in a timely manner. Oversee completion of service requests in 24 hours or per property policy. Inspect grounds, buildings and other property
features as required to minimize liability concerns. Oversee turnkey operations and ensuring that vacant apartments are made rent-ready in a timely manner.
Maintain an effective preventative maintenance program. Maintain an organized, clean and safe work area. Ensure adherence to the Company’s safety and hazard communications programs, policies and procedures. Teach and promote safe work practices to staff. Customer Service Maintain a high level of customer service. Communicate effectively with residents, fellow associates, vendors and supervisors. Knowledge, Skills, Abilities Must be able to diagnose problems and repair the following: Major appliances HVAC (EPA Certification) Basic – Intermediate plumbing Basic – Intermediate electrical (when no license required) Sheetrock General carpentry Pool care (if required by property) Roof and gutter repair Wallpaper/painting Foundation/sidewalk repairs Irrigation and maintenance repairs Landscaping Ice and snow removal In addition, the position requires the following skills: Ability to deal well with people Good verbal communication skills Strong customer service skills Licenses EPA certification, Type I and II Valid driver’s license and current automobile insurance Other licenses and certifications as required by state or federal law.3 Training Attend and participate in the FAM, LLC technical training from Regional Maintenance Coordinator programs as required to maintain personal and professional skill level.
Attendance The position requires ability to work 40 hours per week. Weekends as circumstances warrant; on-call on a rotating basis and for emergencies. Required Education and Experience No specific level of education required. Minimum three (3) years’ previous experience in property management maintenance, other building maintenance or related trade. Older properties (5+ years) may also require previous renovation experience.
Physical Requirements Maintenance will spend 90 to 95 percent of their time performing hands-on repairs/maintenance work. The remaining time will be spent supervising the work of other employees and outside contractors. The position requires ability to transport or move up to 50 pounds variable distances; the mobility and flexibility to use ladders and to access and work in confined spaces or at heights in excess of nine feet; the ability to work outdoors in temperatures exceeding 90 degrees or below 32 degrees Fahrenheit. Ability to personally perform general maintenance repair tasks without endangering themselves, residents or fellow employees.
Working Conditions/Tools Required The position requires employees s to furnish their own tools and vehicle to perform daily routine tasks around the property. Persons must be able to drive the vehicle without jeopardizing the safety of residents and fellow employees. The position requires employees to be able to use general maintenance equipment including, but not limited to: hand tools, power tools, ladders, dollies, jacks, motors, pumps, compressors, blower equipment, augers, calipers, volt meters, testing meters, refrigerant, recovery units, landscaping equipment, vacuum pump, pool chemicals and required safety equipment, etc.
The position requires individuals to wear company specified maintenance uniform apparel and safety equipment as required.
It’s just the starting point of your career, so launch your future with us! Essential functions and responsibilities of the position may vary by Aramark location based on client requirements and business needs. Job Responsibilities • Ensure guest satisfaction by maintaining all dishes, pots, pans, silverware, glasses, equipment, and kitchen utensils are cleaned and sanitized • Maintains dishwashing station, three compartment sink and related areas cleaned • Ensures equipment is clean and in working condition; reports any issues to management • Performs other light maintenance and custodial tasks • Maintains excellent customer service and positive attitude towards guest, customers, clients, co-workers,
etc.
• Adheres to Aramark safety policies and procedures including proper food safety and sanitation • Ensures security of company assets At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers.
In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. Qualifications • Demonstrates an understanding of basic sanitation procedures • Must be able to follow basic safety procedures due to exposure to hazardous chemicals • Must be available to work flexible hours including evenings and weekends This role may have physical demands including, but not limited
to, lifting, bending, pushing, pulling and/or extended walking and standing.
This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Education About Aramark Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, interaction, gender, pregnancy, disability, interactionual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law.
About Aramark The people of Aramark proudly serve millions of guests every day through food, facilities, and uniform services in 19 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential.
Learn more about working here at http: // or connect with us on Facebook , Instagram and Twitter.
for a Team Manager II Facility Maintenance. What We Bring To The Table: The best people deserve the best rewards. In addition to the benefits you’d expect from a global leader (401k, health insurance, paid time off, etc. ) we also offer: • Competitive compensation • Career growth opportunities • Flexibility and Support for Diverse Life Stages and Choices • We prioritize our communities and the planet we share.
We are proud to be awarded as a Diversity Inc. Top 50 company for Diversity and have multiple Sustainability awards (ranking #22 in the World and #1 in Food Products) • Wellbeing programs including Physical, Mental and Financial wellness • Tuition assistance Under the general direction
of the Engineering Manager, the Team Manager II Facility Maintenance will be responsible for simultaneously managing multiple capital projects of significant value from the evaluation through implementation stages.
The role effectively works with stakeholder teams to deliver reliable solutions employing performance based technical specifications, procurement, FAT's, installation, commissioning, start-up, operation, maintenance and improvement of packaging machinery and manufacturing support systems. This role delivers effective results by investigating, analyzing and improving manufacturing equipment systems. Project workload can vary with regulatory and environmental priorities. This
position may, if required, act as the liason with governmental and regulatory agencies, also leading projects to assure facility compliance.
In this case, project workloads are replaced with a significant regulatory and environmental responsibility. Responsibilities: Work with manufacturing and maintenance partners to provide technical support in the design, development, purchase, installation, commissioning, start-up, operation, maintenance and improvement of packaging machinery and support systems. Provide watch dog technical support periodically until improvement results are successfully sustained for a period no less than 90 days. For projects that do not deliver results, significantly refocus efforts to deliver the expected results.
Lead and participate in improvement activities: Focused Improvements, Single Minute Exchange of Die (SMED), packaging systems analysis, spare parts processes to increase reliability and overall systems optimization. Actively participate in daily management activities to improve systems reliability. Attend specific team meetings and daily plant-wide communication meetings as required to advocate and support manufacturing and other business partners results. Preparation of final CAAPs in accordance with best practice procedures.
Ensure that projects are properly planned to provide sufficient funding, review supporting data to determine that stated results and deliverables are achievable, and secure the necessary approvals. Monitor implementation of capital projects to ensure that projects are completed as planned and that approved funds are properly spent to deliver the specified IRR % results. Perform post-installation audits, reconcile financial metrics, and share key learnings for future project improvements. Coordinates the selection, design, and layout of processing and packaging machinery to ensure efficiency, reliability, optimum space utilization and adequate production capacity.
On an ongoing basis, initiate design changes and modifications to further improve machine efficiency, facilitate packaging design changes, cost reductions, and to expand the capability of existing equipment to efficiently produce new products. Assure that all projects successfully deliver vertical start-ups. For sites that have a permanent regulatory engineering role, the following activities will be the responsibility of that engineer, working with other Project Engineers. For other sites, engineers may be responsible for meeting regulatory requirements pertaining to the areas of waste disposal, air emissions, and facilities permits and codes.
May be responsible for timely filing of all regulatory documents to the appropriate Federal, State, and Local Governmental agencies. Assure that all employees are trained on all new regulations and support the Environmental plan fro the facility. Provide technical leadership of cross functional project teams to resolve technical and other challenges that develop during project execution. Seek out opportunities to coach and mentor team members on technical competencies and understanding.
Evaluate, develop, document and implement cost reduction projects and deliver on key targets. Work closely with site training, vendors and operations teams to effectively facilitate training for technicians, managers, mechanics and other partners. Verify that knowledge is transferred effectively to the incumbents and that manufacturing certification processes are validated and robust. Lead project teams from concept through start up and through initial operational phases. Assure that all projects are successfully completed and project results are sustained. Required Qualifications: Education – BS in Engineering (Mechanical/Electrical Preferred) Facility Management Experience Preferred Individuals will generally enter this role with a minimum of 3 years of technical experience in a multi-disciplinary environment driving improvement in process, supply chain, packaging, control systems and plant utilities.
Alternately, regulatory projects management expertise if the role is primarily focused on environmental regulatory management. GMP food manufacturing, packaging machinery Experience and proven success in delivering multiple / simultaneous projects and managing significant cash flow Experience leading hourly maintenance staff #LI-SZ1 Mc Cormick & Company is an equal opportunity/affirmative action employer.
All qualified applicants will receive consideration for employment without regard to interaction, gender identity, interactionual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. As a general policy, Mc Cormick does not offer employment visa sponsorships upon hire or in the future.
Facilities/Maintenance jobs encompass a broad range of roles dedicated to the upkeep, repair, and optimization of buildings and equipment. These roles ensure operational efficiency, safety, and comfort within various environments such as commercial complexes, residential areas, and industrial sites. Key characteristics of such positions include a hands-on approach, problem-solving skills, and a thorough understanding of maintenance procedures and health and safety regulations. This field often involves coordination with multiple departments, managing emergency repairs, and conducting regular inspections to maintain high standards of functionality and appearance.
Facilities/Maintenance Jobs involve ensuring that buildings and their services meet the needs of the people that work in them. These roles are critical for the smooth operation of physical spaces, requiring maintenance of electrical systems, plumbing, HVAC, and general upkeep. Maintenance workers perform repairs and preventive maintenance to keep infrastructure in optimal condition. Key characteristics of these jobs include problem-solving skills, technical knowledge, and a hands-on approach to ensure safety and functionality within a facility. These positions can range from custodial work to specialized technical maintenance, often necessitating a willingness to respond to emergencies and the ability to work independently or as part of a team.
