and construction services. We succeed as a team by embracing integrity, mutual respect, innovation, service, sustainability, and financial strength. Position Overview This is a skilled position involving the safe and efficient operation of various types of construction equipment including but not limited to Loaders, Back Hoes, Track Hoes, Haul Trucks, Water Trucks, Etc.
Key Responsibilities (Essential Duties and Functions) Operate equipment safely and efficiently. Responsible for safe slopes on excavations and proper barricading. Locate utilities and other buried lines prior to digging. Perform minor servicing and maintenance or refer major problems to the supervisor. Knowledge of trenching
and shoring standards. Keep time and material records. Knowledge of aggregate sizes and classifications. Knowledge of weight requirements of loads leaving the pit.
Travel from interstate highway to rural dirt roads from various locations. May assist Laborer at various job sites as needed. May perform physical tasks involved with laying pipe and utility lines, and/or tasks involved with road construction and laying asphalt, etc. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made
to enable individuals with disability to perform the essential functions.
Education/Experience High school diploma or general education degree (GED) is preferred. Work Requirements Previous heavy equipment operation experience or training is highly preferred. Knowledge/Skill Requirements Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to apply common sense understanding to carry out detailed, but uninvolved written or oral instructions. Ability to work well with others in a group or one on one setting.
Certificates, Licenses, Registrations Valid Driver’s License is preferred Key Competencies Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs. Teamwork - Contributes to building a positive team spirit. Judgment - Exhibits sound and accurate judgment. Planning/Organizing - Uses time efficiently. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Accepts responsibility for own actions. Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.
Adaptability - Adapts to changes in the work environment; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Attendance/Punctuality - Is consistently at work and on time. Dependability - Follows instructions, responds to management direction; Commits to long hours of work when necessary to reach goals. Initiative - Asks for and offers help when needed. Innovation - Generates suggestions for improving work.
Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to sit, climb, and use hands to signal and handle equipment. The employee is occasionally required to stand, walk, crawl, kneel, bend, and reach with hands and arms above their shoulders.
The employee must occasionally lift and/or move anywhere up to 50-75 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and depth perception. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; outside weather conditions and vibration.
The employee is occasionally exposed to high, precarious places and risk of electrical shock. The noise level in the work environment is usually loud. The statements included in this job description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Other duties may be assigned as required. Requirements for this job are subject to modification by the Company and its designees, and reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs A diverse and inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of large international organization.
If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Staker Parson Companies, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability--If you want to know more, please click on this link.
and assigning lot numbers. This person must be capable of performing all employee tasks and other duties as required and assigned. Essential Duties and Responsibilities include the following. Other duties may be assigned Following all safety rules and procedures.
Ability to work in a fast paced environment. Works closely with local management and production employees to achieve the “My Goal is Zero Accidents” objective. Ability to operate all equipment on the production line to include changes and set-up in the manufacturing process. Checking all work orders/specification sheets for specific work instructions. Perform hourly quality checks and double checks for accuracy. Accurately
complete all paperwork as required. Collect retains during hourly quality checks for Quality Control inspection. Inspect work for accuracy, completeness, and professional look.
Responsible for clean out of the blenders in accordance with instructions. Perform random quality checks every 5 to 10 minutes to ensure product specifications. Ensuring correct material, packaging supplies and quality control tools are being used. Scan product and material into LN. Limiting Scrap and wasting of material. All aspects of changing a line over to another part/style number. Trouble-shooting issues of the line. Provide training or help to other employees when needed or as needed to team members.
Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required. Education and/or Experience High School diploma or equivalent. Language Skills Fluent in English, both verbal and written. Ability to read and interpret documents such as safety rules, work orders, operating instructions and procedure manuals and manufacturing terminology. Ability to print simple sentences and legibly complete reports. Ability to follow and understand verbal instructions. Ability to effectively present information in one-on-one and small group situations, to other employees of the organization and respond to questions.
Mathematics Skills Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratios, and percentages to practical situations. REASONING ABILITY: Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee is regularly required to stand, walk and use hands to finger, handle, or feel. The employee is regularly required to reach with hands and arms. The employee is regularly required to hear and talk. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 20 pounds, frequently lift and/or move 35 pounds and occasionally lift/move 50 pounds or more with help from others or a mechanical lifting device.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is on occasion exposed to mechanical moving parts and vibration, fumes, airborne particles, risk of electrical shock, and loud noise levels that require hearing protection.
Occasional exposure to hot/humid conditions, outside environments of extreme heat, cold and wet conditions are possible. The job duties, physical demands and work environment characteristics described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Where possible, reasonable accommodation may be made to enable individuals with disabilities to perform the essential job functions where it does not cause undue hardship or safety risks to the company and/or the employee.
Tekni-Plex Rewards: At Tekni-Plex, we value all of our people across the globe. We strive to provide a work environment that leads to your professional fulfillment. Since fulfillment means something different to everyone, the rewards that Tekni-Plex provides globally are appropriately diverse and suited to help you perform your best inside and outside the company. Our rewards programs include: We offer a full complement of valuable Health, Wellness, and Welfare benefits which include: Medical, Dental, and Vision.
No waiting period for medical benefits. Life and Disability 401(k) and Match Wellness Program including EAP Pay for Performance philosophy Tekni-Plex is committed to providing equal opportunity for employees and applicants in all aspects of the employment relationship, without regard to race, color, interaction, interactionual orientation, gender identity, genetic information, national origin, citizenship, marital status, veteran status, disability, age, religion or any other classification protected by law. If you'd like more information about your EEO rights as an applicant under the law, please click on the following document names to download the files for review: EEO is the Law & EEO is the Law Supplement.
together to reinvent the way our world is built. Join our team and help Ash Grove build America. Reports To : Terminal Manager Shift : Day Shift Pay : $28 per hour Job Summary Performs procedures involved with loading trucks, and unloading railroad cars. Assists in the maintenance of terminal equipment and grounds.
Works under close supervision with standard practice procedures and guidelines. Refers all problems to supervisor for guidance. Essential Functions Assures proper cement types are loaded into bulk trucks. Uses credit approval lists, cement inventory reports, and approved shipping instructions to determine if a customer’s request for cement can be loaded. Maintains shipping
logs, prepares bills of lading, and calculates split-load tonnages based on a trucker’s instructions. Operates pneumatic and mechanical equipment for truck loading from computer console using programmed screens, keyboard, and mouse.
Performs daily activities associated with handling inquiries and orders for customers and sales personnel as specified by Terminal Manager or Senior Terminal Operator. Assures proper cement types are unloaded from railcars into designated silos, without contamination of cement types, using pneumatic and hydraulic railcar unloading equipment. May operate a programmable hydraulic railcar indexer, compressors, and/or a cement bagger. Operates power sweeper, forklift
truck, and front-end loader. Performs general cleanup duties around the loading area.
Skills Proficient in English written and verbal communication skills and understanding of warning labels, instructions, and signs. Demonstrated customer service skills on a regular basis. Additional Skills and Abilities Ability to operate the loading systems used in loading trucks and railcars. Ability to operate sweeper and general hand tools. Must be able to calculate loads going into trucks by using general math calculations. Must be proficient at database input and have the ability to use a computer. Must be technically oriented in troubleshooting and repairing basic mechanical, pneumatic, and minor electrical malfunctions.
Knowledge of terminal operation policies and procedures. Skill in using terminal equipment and computerized systems. Ability to lift heavy materials weighing up to 80 pounds. Ability to operate all terminal equipment including railcar vibrators, silos, and related equipment, switch engines, and rail cars. Ability to climb silo ladders up to 50-90 feet in height (as applicable for each terminal). Work Experience Two years of mechanical maintenance experience preferred in a similar or related industrial facility. Working knowledge of welding, cutting torch basics, and mechanics.
Ability to operate mobile equipment such as a forklift, trucks, man lifts, and bobcat-related equipment. Ability to install various types of equipment and machinery in the terminal. Education H. S. Diploma / GED (Required) What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs A diverse and inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family.
CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of large international organization. If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day.
Thank you for your interest! Ash Grove Cement, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability--If you want to know more, please click on this link.
and construction services. We succeed as a team by embracing integrity, mutual respect, innovation, service, sustainability, and financial strength. Position Overview This is a skilled position involving the safe and efficient operation of various types of construction equipment including but not limited to Loaders, Back Hoes, Track Hoes, Haul Trucks, Water Trucks, Screeds, Etc.
Key Responsibilities (Essential Duties and Functions) Operate equipment safely and efficiently. Responsible for safe slopes on excavations and proper barricading. Locate utilities and other buried lines prior to digging. Perform minor servicing and maintenance or refer major problems to the supervisor. Knowledge
of trenching and shoring standards. Keep time and material records. Knowledge of aggregate sizes and classifications. Knowledge of weight requirements of loads leaving the pit.
Travel from interstate highway to rural dirt roads from various locations. May assist Laborer at various job sites as needed. May perform physical tasks involved with laying pipe and utility lines, and/or tasks involved with road construction and laying asphalt, etc. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations
may be made to enable individuals with disability to perform the essential functions.
Education/Experience High school diploma or general education degree (GED) is preferred. 5 years experience as a Screed Operator. Work Requirements Previous heavy equipment operation experience or training is highly preferred. Knowledge/Skill Requirements Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to apply common sense understanding to carry out detailed, but uninvolved written or oral instructions.
Ability to work well with others in a group or one on one setting. Certificates, Licenses, Registrations Valid Driver’s License is preferred Key Competencies Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs. Teamwork - Contributes to building a positive team spirit. Judgment - Exhibits sound and accurate judgment. Planning/Organizing - Uses time efficiently. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Accepts responsibility for own actions. Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.
Adaptability - Adapts to changes in the work environment; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Attendance/Punctuality - Is consistently at work and on time. Dependability - Follows instructions, responds to management direction; Commits to long hours of work when necessary to reach goals. Initiative - Asks for and offers help when needed. Innovation - Generates suggestions for improving work.
Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to sit, climb, and use hands to signal and handle equipment. The employee is occasionally required to stand, walk, crawl, kneel, bend, and reach with hands and arms above their shoulders.
The employee must occasionally lift and/or move anywhere up to 50-75 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and depth perception. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; outside weather conditions and vibration. The employee is occasionally exposed to high, precarious places and risk of electrical shock. The noise level in the work environment is usually loud. The statements included in this job description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Other duties may be assigned as required. Requirements for this job are subject to modification by the Company and its designees, and reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs A diverse and inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of large international organization.
If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Staker Parson Companies, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability--If you want to know more, please click on this link.
Construction/Skilled Trade Jobs encompass a wide variety of roles within the building and maintenance of structures and infrastructure. These positions often involve physical labor and require specialized skills or training, such as carpentry, plumbing, electrical work, welding, and masonry. Individuals in these fields typically work on construction sites, in residential and commercial buildings, or on roads and bridges. The work is hands-on and often takes place outdoors, demanding attention to safety, proficiency with tools and equipment, and sometimes, certification or apprenticeship credentials. The sector is known for its contribution to economic development and its demand for a workforce adept at problem-solving and craftsmanship.
and construction services. We succeed as a team by embracing integrity, mutual respect, innovation, service, sustainability, and financial strength. Position Overview This is a skilled position controlling production and load out of materials produced in plants.
The plant operator is responsible for the efficient working condition of plant equipment and is expected to perform minor servicing and maintenance or refer major problems to the supervisor. Key Responsibilities (Essential Duties and Functions) Reads work schedules and determines sequence of operations. Operates plant according to production schedule using appropriate materials. Monitor material operation to ensure quality of
mix. Performs basic maintenance and service on plant as required. Ability to weld using an arc welder or cutting torch is preferred. Cleans control house and yard facility daily.
Enters production information into computer systems. Other duties as assigned per supervisor. May be subject to drug testing, medical exams and physical agility testing. Operate equipment safely and efficiently. Locate utilities and other buried lines prior to digging. Perform minor servicing and maintenance or refer major problems to the supervisor. Keep time and material records. Knowledge of aggregate sizes and classifications. Knowledge of weight requirements of loads leaving the pit. Qualifications To perform
this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made to enable individuals with disability to perform the essential functions. Education/Experience High school diploma or general education degree (GED) preferred. Two years related experience and/or training; or equivalent combination of education and experience. Work Requirements Ability to read and comprehend instructions, short correspondence, and memos. Ability to write correspondences and memos. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Ability to apply common sense understanding to carry out detailed, but uninvolved written or oral instructions. Ability to work well with others in a group or one on one setting. To perform this job successfully, an individual should have knowledge of Inventory and Order processing systems; uses job specific computer system for ticketing and two way radio for communications. Knowledge/Skill Requirements Must have a current and valid driver’s license. Key Competencies Customer Service - Manages difficult or emotional employee situations; Responds promptly to employee needs; Responds to requests for service and assistance; Meets commitments.
Teamwork - Contributes to building a positive team spirit. Judgment - Exhibits sound and accurate judgment. Planning/Organizing - Uses time efficiently. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Accepts responsibility for own actions. Interpersonal Skills - Focuses on solving conflict, not blaming; Maintains confidentiality; Listens to others without interrupting; Keeps emotions under control; Remains open to others' ideas and tries new things.
Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Adaptability - Adapts to changes in the work environment; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Attendance/Punctuality - Is consistently at work and on time. Dependability - Follows instructions, responds to management direction; Commits to long hours of work when necessary to reach goals.
Initiative - Asks for and offers help when needed. Innovation - Generates suggestions for improving work. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance Ability to apply common sense understanding to carry out detailed, but uninvolved written or oral instructions. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The employee is frequently required to sit, climb, and use hands to signal and handle equipment. The employee is occasionally required to stand, walk, crawl, kneel, bend, and reach with hands and arms above their shoulders. The employee must occasionally lift and/or move anywhere up to 50-75 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and depth perception. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; outside weather conditions; and extreme cold and/or heat. The noise level in the work environment is usually moderate to loud. The statements included in this job description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job.
Other duties may be assigned as required. Requirements for this job are subject to modification by the Company and its designees, and reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs A diverse and inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family.
CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of large international organization. If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day.
Thank you for your interest! Staker Parson Companies, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability--If you want to know more, please click on this link.
Construction/skilled trade jobs refer to a broad category of professions that require specific training, expertise, and practical skills in construction and building trades. These positions often include carpenters, electricians, plumbers, welders, masons, and HVAC technicians, among others. Characteristic of these roles is the hands-on nature of the work, the necessity to understand and interpret blueprints or design plans, and the use of specialized tools and equipment. Workers in these fields typically undergo apprenticeships or vocational education to hone their craft, and they play a critical role in infrastructure development, maintenance, and repair, contributing to the physical backbone of society.
and assigning lot numbers. This person must be capable of performing all employee tasks and other duties as required and assigned. Essential Duties and Responsibilities include the following. Other duties may be assigned Following all safety rules and procedures.
Ability to work in a fast paced environment. Works closely with local management and production employees to achieve the “My Goal is Zero Accidents” objective. Ability to operate all equipment on the production line to include changes and set-up in the manufacturing process. Checking all work orders/specification sheets for specific work instructions. Perform hourly quality checks and double checks for accuracy. Accurately
complete all paperwork as required. Collect retains during hourly quality checks for Quality Control inspection. Inspect work for accuracy, completeness, and professional look.
Responsible for clean out of the blenders in accordance with instructions. Perform random quality checks every 5 to 10 minutes to ensure product specifications. Ensuring correct material, packaging supplies and quality control tools are being used. Scan product and material into LN. Limiting Scrap and wasting of material. All aspects of changing a line over to another part/style number. Trouble-shooting issues of the line. Provide training or help to other employees when needed or as needed to team members.
Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required. Education and/or Experience High School diploma or equivalent. Language Skills Fluent in English, both verbal and written. Ability to read and interpret documents such as safety rules, work orders, operating instructions and procedure manuals and manufacturing terminology. Ability to print simple sentences and legibly complete reports. Ability to follow and understand verbal instructions. Ability to effectively present information in one-on-one and small group situations, to other employees of the organization and respond to questions.
Mathematics Skills Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratios, and percentages to practical situations. REASONING ABILITY: Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee is regularly required to stand, walk and use hands to finger, handle, or feel. The employee is regularly required to reach with hands and arms. The employee is regularly required to hear and talk. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 20 pounds, frequently lift and/or move 35 pounds and occasionally lift/move 50 pounds or more with help from others or a mechanical lifting device.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is on occasion exposed to mechanical moving parts and vibration, fumes, airborne particles, risk of electrical shock, and loud noise levels that require hearing protection.
Occasional exposure to hot/humid conditions, outside environments of extreme heat, cold and wet conditions are possible. The job duties, physical demands and work environment characteristics described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Where possible, reasonable accommodation may be made to enable individuals with disabilities to perform the essential job functions where it does not cause undue hardship or safety risks to the company and/or the employee.
Tekni-Plex Rewards: At Tekni-Plex, we value all of our people across the globe. We strive to provide a work environment that leads to your professional fulfillment. Since fulfillment means something different to everyone, the rewards that Tekni-Plex provides globally are appropriately diverse and suited to help you perform your best inside and outside the company. Our rewards programs include: We offer a full complement of valuable Health, Wellness, and Welfare benefits which include: Medical, Dental, and Vision.
No waiting period for medical benefits. Life and Disability 401(k) and Match Wellness Program including EAP Pay for Performance philosophy Tekni-Plex is committed to providing equal opportunity for employees and applicants in all aspects of the employment relationship, without regard to race, color, interaction, interactionual orientation, gender identity, genetic information, national origin, citizenship, marital status, veteran status, disability, age, religion or any other classification protected by law. If you'd like more information about your EEO rights as an applicant under the law, please click on the following document names to download the files for review: EEO is the Law & EEO is the Law Supplement.
and construction services. We succeed as a team by embracing integrity, mutual respect, innovation, service, sustainability, and financial strength. Position Overview This is a skilled position involving the safe and efficient operation of various types of construction equipment including but not limited to Loaders, Back Hoes, Track Hoes, Haul Trucks, Water Trucks, Etc.
Key Responsibilities (Essential Duties and Functions) Operate equipment safely and efficiently. Responsible for safe slopes on excavations and proper barricading. Locate utilities and other buried lines prior to digging. Perform minor servicing and maintenance or refer major problems to the supervisor. Knowledge of trenching
and shoring standards. Keep time and material records. Knowledge of aggregate sizes and classifications. Knowledge of weight requirements of loads leaving the pit.
Travel from interstate highway to rural dirt roads from various locations. May assist Laborer at various job sites as needed. May perform physical tasks involved with laying pipe and utility lines, and/or tasks involved with road construction and laying asphalt, etc. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Reasonable accommodations may be made
to enable individuals with disability to perform the essential functions.
Education/Experience High school diploma or general education degree (GED) is preferred. Work Requirements Previous heavy equipment operation experience or training is highly preferred. Knowledge/Skill Requirements Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to apply common sense understanding to carry out detailed, but uninvolved written or oral instructions. Ability to work well with others in a group or one on one setting.
Certificates, Licenses, Registrations Valid Driver’s License is preferred Key Competencies Customer Service - Manages difficult or emotional customer situations; Responds promptly to customer needs. Teamwork - Contributes to building a positive team spirit. Judgment - Exhibits sound and accurate judgment. Planning/Organizing - Uses time efficiently. Professionalism - Approaches others in a tactful manner; Reacts well under pressure; Accepts responsibility for own actions. Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly.
Adaptability - Adapts to changes in the work environment; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Attendance/Punctuality - Is consistently at work and on time. Dependability - Follows instructions, responds to management direction; Commits to long hours of work when necessary to reach goals. Initiative - Asks for and offers help when needed. Innovation - Generates suggestions for improving work.
Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is frequently required to sit, climb, and use hands to signal and handle equipment. The employee is occasionally required to stand, walk, crawl, kneel, bend, and reach with hands and arms above their shoulders.
The employee must occasionally lift and/or move anywhere up to 50-75 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and depth perception. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts; outside weather conditions and vibration.
The employee is occasionally exposed to high, precarious places and risk of electrical shock. The noise level in the work environment is usually loud. The statements included in this job description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Other duties may be assigned as required. Requirements for this job are subject to modification by the Company and its designees, and reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs A diverse and inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of large international organization.
If you’re up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Staker Parson Companies, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability--If you want to know more, please click on this link.
Construction/Skilled Trade Jobs encompass a wide variety of roles within the building and maintenance of structures and infrastructure. These positions often involve physical labor and require specialized skills or training, such as carpentry, plumbing, electrical work, welding, and masonry. Individuals in these fields typically work on construction sites, in residential and commercial buildings, or on roads and bridges. The work is hands-on and often takes place outdoors, demanding attention to safety, proficiency with tools and equipment, and sometimes, certification or apprenticeship credentials. The sector is known for its contribution to economic development and its demand for a workforce adept at problem-solving and craftsmanship.
Must have 4+ years of experience and have OSHA prior to starting Must have own tools and PPE Must have own transportation to job site No mileage covered or extra per diem is covered If interested, please submit resume back for consideration For more opportunities, please view the link www.
tradesmen. jobs Tradesmen International is seeking entry level Roofing Laborers to join our team. If you are a Roofer Helper eager to become a skilled Commercial Roofer by improving your skills and learning new ones, this is your chance to launch your career! We are recognized internationally as a leading source for reliable, skilled craftsmen with thousands of employees across North America. With more
than 5,000 active clients we have plenty of great entry level opportunities for Roofer Helpers that want to be the best in their field. We offer consistent work, top pay, benefits, and employment opportunities in most major markets throughout North America.
As an entry level Roofer you will work under the direct supervision of a qualified Journeyman Commercial Roofer learning to install different types of roofing systems such as: TPO, PVC, EPDM rubber, built-ups, Bitumen, metal and dura-last roofing. Additional responsibilities: Checking to ensure that completed roofs are watertight Sweeping and cleaning roofs to prepare them for the application of new roofing materials Locating worn
or torn areas in roofs Covering roofs with layers of roofing felt or asphalt strips before installing tile, slate, or composition materials Removing old roofing materials Unloading materials and tools from work trucks, and unrolling roofing as directed Placing tiles, nailing them to roof boards, and covering nail heads with roofing cement Simply put, we're not a temp agency and don't just hire anyone.
In fact, we're highly selective, committed to hiring only those Roofing Laborers that have exceptional abilities at their skill level, unwavering reliability, strong work ethic, and a desire to be the best. Additional requirements: Eagerness and willingness to learn and receive instruction/direction from qualified Journeyman Commercial Roofer Ability to comprehend, construct, and interpret diagrams, blueprints, and shop drawings for the task being done Experience working with equipment such as boom lifts, scissor lifts, and forklifts, a plus Strong working knowledge of job site safety as well as ability to complete a company specific safety orientation High standard of integrity and professionalism Drug free at all times Benefits In addition to consistent work, top pay, and employment opportunities, we provide a benefits package that is among the best in the industry.
Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with us. Vacation Pay Health insurance Dental and vision plan Prescription drug plan Life insurance Short-term disability 401(k) profit-sharing savings plan Incentive programs Tool purchase programs Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen's full website. (http: ///) Apply Here: http: ///jj3p6h9hr9ddrgpy
Construction/Skilled Trade Jobs refer to professions that specialize in constructing structures, buildings, and infrastructure or specific trades requiring advanced skillsets, typically learned through vocational training or apprenticeships. These jobs include roles like carpenters, electricians, plumbers, masons, and welders. Key characteristics of these roles are the need for hands-on, technical expertise, physical stamina, and often, the ability to interpret blueprints and adhere to safety regulations. As they shape the physical world around us, skilled tradespeople play a crucial role in the development and maintenance of our built environment.
Construction/Skilled Trade Jobs refer to professions that specialize in constructing structures, buildings, and infrastructure or specific trades requiring advanced skillsets, typically learned through vocational training or apprenticeships. These jobs include roles like carpenters, electricians, plumbers, masons, and welders. Key characteristics of these roles are the need for hands-on, technical expertise, physical stamina, and often, the ability to interpret blueprints and adhere to safety regulations. As they shape the physical world around us, skilled tradespeople play a crucial role in the development and maintenance of our built environment.
Construction/Skilled Trade Jobs encompass a wide variety of roles within the building and maintenance of structures and infrastructure. These positions often involve physical labor and require specialized skills or training, such as carpentry, plumbing, electrical work, welding, and masonry. Individuals in these fields typically work on construction sites, in residential and commercial buildings, or on roads and bridges. The work is hands-on and often takes place outdoors, demanding attention to safety, proficiency with tools and equipment, and sometimes, certification or apprenticeship credentials. The sector is known for its contribution to economic development and its demand for a workforce adept at problem-solving and craftsmanship.
to underground construction technicians The Underground Construction Foreman will monitor all aspects of the project and expedite or escalate as appropriate to achieve the cost, quality and schedule goals for the project. Provide daily project updates to the executive team Coordinate with Director to prepare preliminary cost estimates and route proposals including descriptions of the proposed project and a map showing the proposed route.
Coordinate work schedules to provide the proper priority to projects Identification of underground proposed routes and obtain proper underground utility locates Identification of right of way and permitting requirements for proposed routes. Read and interpret
construction documents, i. e. prints and plans as well as fiber splicing diagrams Supervise in house and contractor resources Conduct pre-construction meetings.
Interface with customers to coordinate schedules, plans and risks. Accurately forecast resource requirements based on completion deadlines. Conduct and manage quality control to ensure projects are executed safely and to specifications. Forecast, order and manage material procurement. Obtain permits and licenses. Develop and maintain a professional working relationship with local, county, state and federal officials as needed Follow industry standard construction standards. Participate in preparation and review of estimates with
attention to the following: cost, materials, manpower, general conditions, schedule, insurance, etc.
Maintain all necessary underground equipment for prevention of any unnecessary mechanical break downs Perform other related duties and tasks as assigned or as become evident.
