Location: Portsmouth, VA
Company: Lake Assault Boats
is mostly done in an indoor and heated shop and take great pride in knowing that we build a product that helps serve and protect others. Job Summary The Marine Repair Mechanic is a skilled manufacturing position that is responsible for the repair of aluminum and fiberglass boats for the USCG and Navy, as well as other government and commercial customers.
This is position is responsible for ensuring that all technical parts are correctly installed and comply with the regulatory specs to successfully support the continued use of the boat. Responsibilities Install, maintain and trouble shoot advanced 12 volt/110 electrical systems. The ability to apply that knowledge to existing electrical
circuitry as well as install new, complete systems. Installation and service of electrical components found on board small patrol craft and work boats - including lighting, electronics, pumps, wash down systems, etc.
Ability to understand electrical schematics, fabricate and install wiring harnesses to ABYC Standards. Installation and service of hydraulic steering systems and controls, including installation of hydraulic systems and pumps for various onboard vessel features. Ability to layout and install hardware from bow to stern on new blank hulls and superstructures to include all equipment and systems found on small craft under 40 feet. The ability to read and/or create accurate wiring
schematics and to diagnose and repair problems in existing systems.
Install, maintain and trouble shoot mechanical drive systems. Install, maintain and trouble shoot marine specific components. Assemble, install, maintain, and repair various mechanical systems such as diesel engines to drivelines, hydraulic systems and lighting. Service and repair various systems such as propulsion machinery, propellers, rudders, cargo handling machinery, lifeboat davits, and anchor handling gear. Follow an installation diagram including various measurements, torques and other values/calculations. Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, repair, and operations.
Maintains all safety standards. Operate safety equipment and use safe work habits. Operates a wide variety of handheld and power-assisted tools and production fixtures. Ensures quality and accuracy of their work. Reports issues to supervisor or to team lead and works on troubleshooting and identifying failures and potential failures. Responsible for backssing conditions of the boat and its components as well as conducting operational testing and quality inspections. Positions and secures parts, using hoist, crane, wire and banding machine, or hand tools.
Transports boat using company provided vehicle to pick up and deliver boats to and from client locations around the continental US. Must be able to launch and recover boats for testing and evaluation. Performs other duties as assigned that support the overall objective of the position. Required Skills & Abilities Assisting or partnering with others in close corridors while keeping clear and effective communication. Ability to show strong attention to detail and accuracy. Knowledge in standard build practices in comparable manufacturing environments Strong mechanical background and familiarity in a wide variety of tools used in the assembly process and apply them safely to complete installations.
Follows directions and procedures under supervision Conducts basic problem-solving skills under supervision Effectively communicate to supervisor and manager Adheres to all procedures and safe work practices Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriat and not interrupting at inappropriate times. Mathematics - Using mathematics to solve problems.
Equipment Selection - Determining the kind of tools and equipment needed to do a job. Time Management - Managing one's own time and the time of others. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Aluminum welding skills are beneficial, but not required Qualifications High School Degree, GED or equivalent required Applicants with prior technician experience in the maritime industry preferred Applicants with certificate or degree in Marine Technician, Automotive Technician, or Industrial Maintenance Technician or equivalent experience preferred Must be able to pass a background check.
Must be able to pass drug and alcohol screens. Ability to obtain a driver's license and have a clean driving record. Ability to operate a boat and trailer towing skills. Ability to obtain a state boat operators license. Ability to obtain a passport. Physical requirements Position requires grasping, writing, standing, sitting, walking, kneeling, crawling, repetitive motions, bending, climbing, listening and hearing ability and visual acuity. Must be able to work in tight spaces and awkward positions for long periods of time.
Must be able to conduct inside and outside work in all temperatures. Use of manufacturing equipment. Work in areas at times that are not environmentally controlled. Able to move/lift/pull/push 50 lbs. Ability to get underway with high speed watercraft in variable weather conditions. Must be able to obtain a driver license with trailer use. Must be able to travel as required, with travel occurring up to 25% of the time, including travel outside of the Continental United States. Lake Assault Boats is an equal opportunity employer including disability and vets.
Lake Assault Boats offers competitive pay with excellent benefits: Medical, Dental, & Life Insurance 401(k) Contributions Paid Time Off Job Type: Full-time Job Posted by Applicant Pro
Construction/Skilled Trade Jobs encompass a wide variety of roles within the building and maintenance of structures and infrastructure. These positions often involve physical labor and require specialized skills or training, such as carpentry, plumbing, electrical work, welding, and masonry. Individuals in these fields typically work on construction sites, in residential and commercial buildings, or on roads and bridges. The work is hands-on and often takes place outdoors, demanding attention to safety, proficiency with tools and equipment, and sometimes, certification or apprenticeship credentials. The sector is known for its contribution to economic development and its demand for a workforce adept at problem-solving and craftsmanship.
Construction/Skilled Trade Jobs refer to professions that specialize in constructing structures, buildings, and infrastructure or specific trades requiring advanced skillsets, typically learned through vocational training or apprenticeships. These jobs include roles like carpenters, electricians, plumbers, masons, and welders. Key characteristics of these roles are the need for hands-on, technical expertise, physical stamina, and often, the ability to interpret blueprints and adhere to safety regulations. As they shape the physical world around us, skilled tradespeople play a crucial role in the development and maintenance of our built environment.
fastening systems, titanium structural parts and forged wheels. With nearly 1,150 granted and pending patents, the Company's differentiated technologies promote more fuel efficiency for aircraft and commercial transportation. For more information, visit , including content shared during the Company's May 2022 Technology Day.
Follow: Linked In , Twitter , Instagram , Facebook , and You Tube. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate based upon race, religion, color, national origin, gender, interactionual orientation, gender
identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email Talent Acquisition Co E_Howmet@Basic Requirements: Education: High school diploma or general education degree (GED) Experience : This position requires a minimum of two to four years-related gas tungsten ARC welding (GTAW and TIG) experience and/or training Employees must be legally authorized to work in the United States.
Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this
position. This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.
S. person status. ITAR defines U. S. person as an U. S. Citizen, U. S. Permanent Resident (i. e. 'Green Card Holder'), Political Asylee, or Refugee. Basic Requirements: Education: High school diploma or general education degree (GED) Experience : This position requires a minimum of two to four years-related gas tungsten ARC welding (GTAW and TIG) experience and/or training Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.
This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U. S. person status. ITAR defines U. S. person as an U. S. Citizen, U. S. Permanent Resident (i. e. 'Green Card Holder'), Political Asylee, or Refugee. Description The HSC Welder will weld repair castings, caps, and core plugs that have surface or internal defects, which makes the casting unacceptable to the customer. The HSC Welder will perform the following duties: Operate and maintain welding table and argon purification equipment Produce NDT quality welds using.045" to.125" diameter weld wire for multiple alloys (Ti-6-4, Ti-2, IN718 etc.) Ability to mirror weld and produce NDT quality welds Review, maintain, and understand work instructions Measure, document and map welds Use and maintain the proper weld wire per alloy Perform necessary adjustments to the power source gauges.
Hold argon CFH from 5-30 CFH. Welding 70 - 150 AMP maximum, except for ECY 768 (125 amp max) Construct copper back-ups when necessary Record data either manually or by computer as required Must comply with all company attendance policies and guidelines; this includes, but is not limited to, regular attendance and occasional overtime Skills and Abilities: All Welders must meet the requirements of Activity Instructions 4000.205 and/or AMS 2694.
Must successfully pass the following welders certification test: Repair weld certification to ASME Boiler & PV Code Sec. IX and/or AMS 2694 Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; talk or hear; and taste or smell. The employee frequently is required to sit. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. Frequently the employee must lift and/or move up to 25 pounds and occasionally move with mechanical assistance up to or more than 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
Equipment Used: Welding power source, gas tungsten arc, welding (gtaw) torches, argon purification equipment, welding shield, mirrors, coolant, and gloves. Description The HSC Welder will weld repair castings, caps, and core plugs that have surface or internal defects, which makes the casting unacceptable to the customer. The HSC Welder will perform the following duties: Operate and maintain welding table and argon purification equipment Produce NDT quality welds using.045" to.125" diameter weld wire for multiple alloys (Ti-6-4, Ti-2, IN718 etc.) Ability to mirror weld and produce NDT quality welds Review, maintain, and understand work instructions Measure, document and map welds Use and maintain the proper weld wire per alloy Perform necessary adjustments to the power source gauges.
Hold argon CFH from 5-30 CFH. Welding 70 - 150 AMP maximum, except for ECY 768 (125 amp max) Construct copper back-ups when necessary Record data either manually or by computer as required Must comply with all company attendance policies and guidelines; this includes, but is not limited to, regular attendance and occasional overtime Skills and Abilities: All Welders must meet the requirements of Activity Instructions 4000.205 and/or AMS 2694.
Must successfully pass the following welders certification test: Repair weld certification to ASME Boiler & PV Code Sec. IX and/or AMS 2694 Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; talk or hear; and taste or smell. The employee frequently is required to sit. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. Frequently the employee must lift and/or move up to 25 pounds and occasionally move with mechanical assistance up to or more than 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Equipment Used: Welding power source, gas tungsten arc, welding (gtaw) torches, argon purification equipment, welding shield, mirrors, coolant, and gloves.
warehouse. Requirements Previous experience operating a clamp truck + the ability to lift 50 pounds + wear steel-toe shoes Clamp Truck Operator Duties Load and unload trucks Operate clamp trucks safely Pick and pack products Transport materials throughout the warehouse Other material handler tasks 2nd Shift Monday - Thursday 4:30 PM - 2:30 AM Weekend Shift Friday - Sunday 5 AM - 5 PM Pay 20 per hour Employee Benefits: Medical, dental, vision, and life insurance Short-term disability 401k plans Weekly pay is available every Friday Employee discount programs Referral bonus potential Apply today!
Just click " " to begin our easy application process. We can't wait to meet
you. After you have applied, download our Staffmark Group Work NOW App to receive real-time job offers and apply for additional opportunities. You can download it from the App Store or get it on Google Play.
About Staffmark Staffmark is committed to providing equal employment opportunity for all persons regardless of race, color, religion (including religious dress and grooming practices), interaction, interactionual orientation, gender, gender identity, gender expression, age, marital status, national origin, ancestry, citizenship status, pregnancy, medical condition, genetic information, mental and physical disability, political affiliation, union membership, status as a parent, military
or veteran status or other non-merit based factors. We will provide reasonable accommodations throughout the application, interviewing and employment process.
If you require a reasonable accommodation, contact us. Staffmark is an E-Verify employer. This policy is applicable to all phases of the employment relationship, including hiring, transfers, promotions, training, terminations, working conditions, compensation, benefits, and other terms and conditions of employment. All employees are directed to familiarize themselves with this policy and to act in accordance with it. All decisions with respect to employment matters and other phases of employer-temporary employee relationships will be in keeping with this policy and in accordance with all applicable laws and regulations.
Associated topics: cdl school, driver messenger, lease purchase driver, lyft driving, lyft driving part time, postmates driving, towing service, transportation vendor, van operator, yard driving
