Safety & Quality Coordinator - Pittsville, MD | Ocean Pines, MD

Quality Assurance (QA) jobs entail roles focused on ensuring that products or services meet established standards and customer expectations. People in QA positions are responsible for designing testing processes, creating test plans, identifying defects, and preventing defects by examining the production process. They aim to enhance product reliability and actively work to maintain quality consistency. QA roles often require keen attention to detail, strong problem-solving skills, and an understanding of both product specifications and customer needs. QA is an integral part of product development and maintenance, bridging the gap between the manufacturing processes and the end users to ensure a satisfactory experience.

intended for internal and external customer use. Set up standard or automated test equipment to conduct functional, operational, environmental, and life tests to evaluate performance and reliability of prototype or production assemblies. Analyze test results and repair or adjust assemblies according to analysis.

Recommend corrections and improvements to test procedures to simplify testing and/or assembly processes. Major Responsibilities Include: Conduct functional tests to measure the performance of production electronic systems, assemblies, and sub-assemblies. Test commercial and complex (mil-spec) electronic assemblies with pre-production or prototype documentation. Compare test results

with specifications and accurately record test data. Analyze defective units to determine root cause of failure. Help develop processes, tooling and fixtures as required.

Ensure that all test equipment calibration requirements are maintained. Effectively manage time, and complete all tasks as assigned by the supervisor. Educational Experience: BS or Associate's degree (A. A. ) from accredited college or technical school in Electrical Engineering or similar discipline (EE/EET/ME preferred), or equivalent military training in Electronics Engineering Technology or related field , and five years related experience. Experience/Technical Requirements: Technical knowledge and skills in troubleshooting

down to the component level; solid understanding and working knowledge of RF test equipment such as Network Analyzers, Spectrum Analyzers, Data Error Analyzers, RF generators, etc.

Strong component-level troubleshooting skills. Experience at performing various RF characterization measurements such as; Phase Noise, Spectral Characterization, Noise Figure, RF Power and Bit Error Rate. Experience in alignment and troubleshooting of various RF circuits such as: Modulators, RF amplifiers, Diplexers, Filters, Oscillators, Synthesizers, etc. RF experience to 8 GHz troubleshooting skills are desired. Knowledge of electrical test methodology (e. g. stand alone bench, automated, functional test), planning, procedures, equipment (e.

g. multimeter, oscilloscope, bus analyzer, automated test systems) and result validation criteria (e. g. pass/fail, control limits, tolerances). Knowledge of manufacturing work flow and MRP systems or similar. Knowledge of Microsoft Office Suite (Excel, Word). A general understanding of the production of printed wiring assemblies is desirable but not required. Other Requirements: Must be able to multitask in a fast-paced environment effectively. Must have a positive attitude with a desire to excel in a team-oriented culture.

Availability and willingness to work alternate shifts as necessary is required. Physical Demands Must have good color perception, eyesight, and the ability to effectively use magnification aids such as binocular microscopes and related test equipment. Must have good hand-eye coordination, and the ability to use basic hand tools. Must be able to comfortably lift up to 25 pounds. While performing the duties of this job, the employee is regularly required to sit; use hands, reach with hands and arms, bend and twist to lift and reload items, and talk or hear. This position may require exposure to information which is subject to US export control regulations, i.

e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All applicants must be U. S. persons within the meaning of U. S. regulations. Job Posted by Applicant Pro

will serve as the QCM overseeing the implementation and adherence to the Quality Control Plan, as well as periodic updates and maintenance of the Plan. Responsibilities ESSENTIAL DUTIES & RESPONSIBILITIESThe Essential Duties and Responsibilities are intended to present a descriptive list of the range of duties performed for this position and are not intended to reflect all duties performed within the job.

Other duties may be assigned. The Quality Control Manager (QCM) will describe all methods, procedures and documentation needed to fulfill the quality and safety of the contract. The QC manager will identify potential risk areas and will be responsible for the implementation, documentation,

and execution of the quality control on the project. The ideal candidate will ensure projects comply with applicable plans, standards, and specifications.

This role includes direct oversight and review of the entire documentation and physical inspection of the workflow process to ensure quality is maintained. Qualifications QUALIFICATIONS - EXPERIENCE, EDUCATION AND CERTIFICATIONTo perform this job successfully, an individual must be able to satisfactorily perform each essential duty. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Required (Minimum) Qualifications Five years' experience as a quality control manager on industrial or commercial projects.

Federal project experience preferred. Experience on projects exceeding $500,000 (specifically HVAC and electrically heavy projects) Experience working with the Corps of Engineers (USACE) Current USACE or NAVFAC Construction Quality Management for Contractors (CQM) certification OSHA 30 Certification (can be obtained after employment) Current favorable National Agency Check with Inquiry (NACI), in accordance with AR 380-67Knowledge, Skills, Abilities, and Other Characteristics Ability to effectively communicate in English, both orally and in writing.

Ability to use a computer, Word, Excel, E-mail, etc. Ability to complete accurate daily Quality Control Reports, and lead preparatory, initial and follow-up phase meetings and inspections. Additional specialized training or education may be required based upon tasks or hazards associated with specific Delivery Orders as required by the Government. Valid Driver's License U. S. Citizenship (required for access to secure areas of Military Base) Experience working with a team to develop means and methods to complete construction tasks in a safe and efficient manner by identifying proper PPE and equipment.

PHYSICAL REQUIREMENTSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Must maintain a constant state of mental alertness at all times. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential and marginal functions require maintaining physical condition necessary for bending, stooping, sitting, walking or standing for prolonged periods of time. Additionally, the ability to climb up and down ladders, walk on uneven, shifting surfaces, dirt, mud and gravel & up and down hills as well as occasional work in confined spaces.

The ability to pass a DOT physical and respirator fit testing may be required. DOT COVERED/SAFETY-SENSITIVE ROLE REQUIREMENTS This position is not subject to federal requirements regarding Department of Transportation " safety-sensitive" functions. WORK ENVIRONMENTWork Environment characteristics described here are representative of those that must be borne by an employee to successfully perform the essential functions of this job.

Job is performed both on active construction sites with exposure to all types of weather heat, cold, rain, snow, exposure to dust, dirt and noise, as well as in an office setting with exposure to computer screens and requires extensive use of a computer, keyboard, mouse and multi-line telephone system. Occasional travel may be required. Occasional " off-shift" evening/weekend/holiday work may be required. SUPERVISORY RESPONSIBILITIES Depending upon workload supervision of additional quality control employees and or subcontracted QC employees may be required. ADDITIONAL QUALIFYING FACTORS As a condition of employment, may be required to pass a pre-employment drug screening, as well as periodic random drug screenings, have acceptable reference and background check results to obtain access to secure areas of a military base.

Must have reliable transportation to/from work. Shareholder Preference. BSNC gives hiring, promotion, training and retention preference to BSNC shareholders, shareholder descendants and shareholder spouses who meet the minimum qualifications for the job. Bering Straits Native Corporation is an equal opportunity employer. All applicants will receive consideration for employment, without regard to race, color, religion, creed, national origin, gender, or gender-identity, age, marital status, interactionual orientation, veteran status, disability, pregnancy or parental status, or any other basis prohibited by law.

Equal Opportunity Employer/Veterans/Disabled We participate in the E-Verify Employment Verification Program. We are a drug free workplace.

and industrial quality control improvement. Audit ISO 900 quality management systems, incident investigation, and closure. Audit methods against procedures and work instructions. Serve as technical industrial engineering expert on initiative to achieve full implementation of corporate corrective action/preventive active (CAPA) system.

Collect, analyze, and summarize data evaluating sequencing of operations and other factors impacting quality. Develop quality procedures and processes for execution of professional services. Maintain Quality Management System. Provide technical support for internal issues and CAPA. Develop business intelligence and process measurement. Create, support, and

implement preventative action strategies. Telecommuting Permitted. Minimum Requirements: Masters degree, or foreign equivalent, in Computer Science, Engineering (any) or a closely related field.

Special Skill Requirements: Experience applying Six Sigma concepts to process improvements Formulation of deterministic optimization models Use of multiple regression, ANOVA, and Design of Experiments to analyze data Project Management Quality management systems design and auditing Supply chain management including inventory management, warehousing, transportation, and production Engineering and quality standards and regulations Experience can be gained through work experience, academic coursework, or scholastic achievement. Any suitable combination of education, training and experience is acceptable. Submit resume with references to Req. #20-10423 at: