Location: Naytahwaush, MN
Company: HHS Careers
heating and refrigeration for Naytahwaush & Pine Point Clinic. This position reports to the Facilities Manager or designee. Duties Performs plumbing related duties. Performs painting related duties. Repairs and maintains roofs and other portions of the buildiings, using wood or modern building materials.
Performs heating equipment mechanic duties. Performs electrical worker duties. This position is being re-advertised to solicit additional applications. Applicants who applied previously need not reapply unless submitting updated and/or missing information. Requirements Conditions of Employment Must pass pre-employment examination. Selectee may be subject to a probationary period U. S.
Citizenship is required Selective Service Registration is required for males born after 12/31/1959This is a designated position covered by Public Law 101-630, requiring contact or control over Indian children.
Due to this requirement, the agency must ensure that persons hired for these positions have not been found guilty of or pleaded nolo contendere or guilty to certain crimes. Measles and Rubella immunization required for selectees born after 1957 and seasonal influenza immunization is required for all staff working in Indian Health Service health care facilities. COVID-19 vaccination is required for all selectees prior to entrance on duty. Successfully pass the E-Verify employment
verification check. To learn more about E-Verify, including your rights and responsibilities, visit.
You will need to set up direct deposit so we can pay you. Background Investigation : If you are selected for this vacancy, you must undergo a pre-employment fingerprint check and background investigation. Fingerprint results and background investigation documentation must be cleared prior to hire. After you begin your employment, your continued employment is contingent upon the outcome of a complete background investigation as determined by the sensitivity level of your position. The investigation must find that you are suitable for Federal employment in your position.
If you are found not suitable, you will be terminated after you begin work. If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or subject to possible criminal charges. You may be subject to a credit check as a part of the background investigation process. Qualifications OPEN UNTIL FILLED: You must meet the requirements of the job by 11:59 pm (Eastern Standard Time) of the cut-off date(s) as indicated below: The first Cut-off date for receipt/referral of applications to be considered for available vacant positions will be every Tuesday.
Your resume and any documents submitted will be retained for three months and may be used at any time during this period. After 8 months, you must reapply to this announcement in order to be considered. This position is being re-advertised to solicit additional applications. Applicants who applied previously need not reapply unless submitting updated and/or missing information. To qualify for this position, your resume must state sufficient experience and/or education, to perform the duties of the specific position for which you are applying. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g. Peace Corps, Ameri Corps) and other organizations (e. g. professional; philanthropic; religious; spiritual; community; social). You will receive credit for all qualifying experience, including volunteer and part time experience. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week. BASIC REQUIREMENT(S) : WG-4749-08: Following oral or written instructions and/or work orders; performing maintenance mechanic duties, including use and apply standard building techniques, practices, and codes, read and understand blueprints, sketches and schematics, read and understand work orders in order to complete assigned work, use and maintain pneumatic hand tools, use and maintain shop tools, drill press, band saw, table saw, etc.
follow manufacturer's instructions for use of power tools, follow safety manuals on operation of tools and equipment, follow safety guidelines working with oils and lubricants, working with inert gases and solvents, acids, adhesives, sealants, paints, oils and lubricants while performing maintenance tasks, respond to frequent changes in instructions, with respect to the team, project and/or task.
Candidates for this position will evaluated under the Federal Wage System (FWS) Job Grading Standards. Applicants will be rated in the knowledge, skills, and abilities to perform the duties of the position. Each of the job elements must be addressed on the on-line backssment questionnaire in order for the applicant to be rated for the position. Your resume must reflect the answers to your on-line backssment questionnaire. MINIMUM QUALIFICATIONS FOR WG-4749-08: A specific length of training and experience is not required, but you must show evidence of training or experience of sufficient scope and quality of your ability to do the work of this position.
Evidence which demonstrates you possess the knowledge, skills, and ability to perform the duties of this position must be supported by detailed descriptions of such on your resume. Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C. You must meet all qualification requirements within 30 days of the closing date of the announcement. How You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications above.
If you meet the minimum qualifications requirements for this position, your application will be evaluated and rated under Category Rating selection procedures. Once the application process is complete, a review of your qualifications will be conducted to determine if you are qualified for this job. Qualified candidates will be assigned to a quality category. The quality categories are: Best Qualified, Well Qualified, or Qualifie d. Within each of these categories, applicants eligible for veteran's preference will receive selection priority over non-preference eligibles.
Please note that if, after reviewing your resume and or supporting documentation, a determination is made that you have inflated your qualifications and or experience, your category rating can and will be adjusted to more accurately reflect your abilities, or you may lose consideration for this position. Please follow all instructions carefully. Errors or omissions may affect your eligibility. To determine if you are qualified for this position, a review of your resume and supporting documentation will be made and compared against the qualifications as defined in the qualifications section of this vacancy announcement and your responses to the backssment questions.
You will be rated based on the information provided in your resume (your resume must state specific duties that relate to this position) and your responses to the backssment questions will be evaluated against the duties you provided in your resume, along with your submitted documentation to determine your ability to demonstrate the following. Ability To Do The Work Of The Position Without More Than Normal Supervision (Screen-out Element) Knowledge of Equipment Assembly, Installation, Repair, etc. Knowledge of Materials Technical Practices (theoretical, precise, artistic) The following links below provide information on how you may be eligible for various hiring authorities.
If you are a Veteran, qualified CTAP and ICTAP eligible, or an individual with a disability, please refer to the following links below for additional guidance. CTAP and ICTAP candidates will be eligible for selection priority if it is determined that they have exceeded the minimum qualifications for the position by attaining at least a " well qualified" rating of 85 out of 100. Information about CTAP and ICTAP eligibility is on the Office of Personnel Management's Workforce Restructuring Career Transition website at: CTAP/ICTAP documentation requirements are listed in the " Required Documents" section of this announcement.
Veterans, i. e. (VEOA, VRA, and 30% or more disabled) - Career Transition Assistance Program (CTAP) - Interagency Transition Assistance Program (ICTAP) - Schedule A Appointments for the Disabled - Click here to view vacancy questions: Required Documents Resume : You are highly encouraged to use USAJOBS Resume Builder to ensure all required information is included in your Resume. If you use your own resume, curriculum vitae, or any other written form you choose then you must describe your job-related qualifications that includes beginning and ending dates for paid and non-paid work experience, hours worked per week, month and year of employment for each job title listed, annual salary, and description of job duties.
Include name and address of employer; supervisor name and telephone number. Required as applicable for the purposes of specific eligibility and appointment claim(s), and position requirements: Indian Preference Applicants : If claiming Indian preference, applicants must provide a completed copy of the Form BIA-4432, " Verification of Indian Preference for Employment in the BIA and IHS Only.
" Indian preference will not be given unless a properly signed and dated form is submitted with your application, including any verification by an authorized Tribal Representative or BIA Official of tribal enrollment records. For detailed instructions, see form BIA-4432. Refer to BIA-4432 link: When an Indian Preference candidate possesses Veterans preference the rules regarding Veterans preference apply under ESEP and the applicant must provide documentation in order to receive preference.
Veterans Preference : If claiming Veteran's Preference provide a copy of your DD214 Form (Member 4 copy). To claim 10-Point Veterans Preference, submit a SF-15 Application () along with the appropriate supporting documentation. For additional information regarding Veterans Preference visit: Career Transition Assistance Program (CTAP)/Interagency Career Transition Assistance Program (ICTAP) : If you are claiming CTAP/ICTAP, follow the instructions below: Transcripts : You are encouraged to submit copies of transcripts (official or unofficial) although not required at the time of application.
You must list your courses including titles, credit hours completed, and grades. Official transcripts will be required after tentative selection and prior to issuing an official job offer. Licensure, Certifications : Applicants should list their license/certifications on their resume, along with the expiration date, if applicable. Certification of licensure/certification will be required after tentative selection and prior to issuing an official job offer. You must meet the requirements of the job by 11:59 pm (Eastern Standard Time) of the cut-off date(s) as indicated below: The first Cut-off date for receipt/referral of applications to be considered for available vacant positions will be Tuesday.
Your resume and any documents submitted will be retained for three months and may be used at any time during this period. After 8 months, you must reapply to this announcement in order to be considered. PDN-9ac9bcf6-693b-4896-88ff-5bd7bc07239d
Facilities or maintenance jobs encompass a wide range of roles responsible for ensuring that buildings and systems are in proper working order, clean, safe, and well-maintained. These positions can include technicians, custodians, groundskeepers, and maintenance managers. A key characteristic of such jobs is their focus on preventative care, requiring workers to anticipate problems and address them before they escalate. Additionally, these roles demand a combination of technical knowledge and practical skills, as they may involve electrical, plumbing, HVAC, or general repair tasks. The duties are often physical and can require availability outside of typical working hours for emergency maintenance needs.
as needed. Must have own hand tools. This position requires continuous work near heat, noise, gas, and chemicals. The position requires frequent lifting, climbing, standing, walking, crouching, squatting, bending and kneeling. The position may require weekend and/or holiday work.
PRIMARY ACCOUNTABILITIES: Perform preventative maintenance on production equipment Repair all production equipment as needed Perform breakdown analysis Perform general housekeeping Upgrade production lines with new equipment/technology Work with outside contractors working on assigned line Change line for package changeovers Comply with GMP, safety, and audit standards Work independently under limited
supervision (self-management)Documentation of work schedule and work tasks completed BASIC QUALIFICATIONS: 18 years or older Pass technical backssment addressing job-critical maintenance knowledge areas Experience with mechanical systems (e.
g. gear boxes, chains, sprockets, motors, seals, bearings). Experience with product manuals (e. g. reading and applying knowledge to make repairs). Experience with troubleshooting mechanical breakdowns (pinpointing and fixing breakdowns). Experience with reading mechanical drawings (e. g. hydraulics, pneumatics). HELPFUL EXPERIENCE: Experience with basic electrical systems (e. g. starters, fuses, contacts, relays). Experience with compressors/ammonia
systems (e. g. refrigeration systems). Experience with conveyers and airveyors (air cylinders, diverters, sensors, motor/speed controls).
Experience with electrical systems (installation, frequency drive, troubleshooting) Experience with electronics (e. g. level probes, flow meters, drives/VFDs, etc. ). Experience with gearing and gear boxes (rebuilds, ordering parts, machining parts). Experience with hydraulic systems (high pressure cylinders, pumps, valves, troubleshooting). Experience with kinematics (e. g. line speed/sprocket size ratios, etc. ). Review rating instructions. Experience with packaging/high speed production (e. g. bottling, consumer products, etc.
). Experience with PLC (e. g. industrial maintenance, computer control systems, etc. ). Experience with pneumatics (solenoids, cylinders, motor brakes, reading, troubleshooting). Experience with pneumatics/air compression (e. g. valves, cylinders, etc. ). Experience with preventative maintenance (computerized preventative charts/data). Experience with pumps (e. g. troubleshooting, replacing seals/motors, understanding specs). Experience with schematics (e. g. electrical blueprints with switches, starters, maps, relays). Experience with SERVO (e. g. intelligent/robotic motors, in-coders, etc.
) Experience with troubleshooting (e. g. diagnostics, problem solving, etc. ). Experience working in team based environments (working together with others). Our Company will consider for employment qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Credit Reporting Act, and all other applicable laws, including but not limited to, San Francisco Police Code Sections 4901-4919, commonly referred to as the San Francisco Fair Chance Ordinance; and Chapter XVII, Article 9 of the Los Angeles Municipal Code, commonly referred to as the Fair Chance Initiative for Hiring Ordinance.
> All qualified applicants will receive consideration for employment without regard to race, color, religion, interaction, interactionual orientation, gender identity, national origin, protected veteran status, or disability status. Pepsi Co is an Equal Opportunity Employer: Female / Minority / Disability / Protected Veteran / interactionual Orientation / Gender Identity If you'd like more information about your EEO rights as an applicant under the law, please download the available EEO is the Law & EEO is the Law Supplement documents. View Pepsi Co EEO Policy. Please view our Pay Transparency Statement
ON BONUS Overview Under the direction of the Service Manager, the Maintenance Technician is responsible for bringing units up to market ready condition in accordance with Peak Living standards. Typical range of hours is based on the community needs and may require weekends and after hour emergency services.
Responsibilities Complete make ready maintenance. Complete assigned work orders and ensure compliance to Peak Living standards. Assist with building and common area maintenance. Assist with preventative maintenance program and maintain property equipment. Qualifications High school diploma or equivalent GED. Minimum 1 year of experience in general maintenance in property management
environment. EPA and CPO certification preferred, but not required. Knowledge of general maintenance (i. e. electrical, plumbing, appliance repair, etc. ) Demonstrate effective communication and interpersonal skills.
Why Join Peak Living 3 Weeks of Paid Time Off (PTO) 10 Paid Holidays + 3 Floating Holidays Medical, Dental, and Vision Plans 401k matching Employee Referral Bonus Program Employee Assistance Program Employee Appreciation Events Job Posted by Applicant Pro
our employees as well as our customers. Building Resources is known for its high level of professionalism, providing good jobs, accountability, resourcefulness and great customer service. What you can expect from us is having the resources you need in order to successfully do your job.
You can expect to make decisions independently and work in a flexible work environment. Summary: This position is a straight sales position, focused on bringing in new accounts. Some degree of customer management is required. We are looking for someone with strong B2B experience, able networker and externally motivated. Must be proficient in Microsoft Word, Excel, and Power Point tools Daily/On-going: Check
email and voice mail for customer concerns. Fill out appropriate paper work for work orders, customer complaints etc. Conduct cold calls, walk-ins or other means by which to prospect for new customers and qualify them Prospect, meet and present proposals to decision makers Respond to RFP s from management companies - pre-determining if they are worthwhile with the President.
Submit all bids prior to presentation to President for review and approval. Put together and monitor proposal packets and all sales/marketing related tools Conduct walkthroughs with customers as requested by Pres. Turn in all paperwork for new starts to Operations, Accounting and HR Report needs for marketing materials
and any sales related materials/tools to Pres. backss promotional product needs and take responsibility for ordering them as needed Expectations: Attend Building Owner s and Manager s Association (BOMA) and Institute for Real Estate Management (IREM) events and golf tournaments and trade shows for networking and educational purposes The expectation is that sales people will meet and exceed revenue targets and increase business by 20% from previous year.
Focus on generating accounts for new buildings. Attend all manager meetings as requested. Manage personal expenses, budgets, ACT database, collateral, and calendar. All new accounts must meet criterion of minimally M-F service of 2 hours per night.
Key objectives/position measures: To increase sales each year by 20% each year from the previous year. Commissions start after 6 months. Base salary for first 6 months; level based on qualifications. Qualifications: Bachelor s degree 3 Plus years of direct B2B sales 5 years of customer service and /or service sales background. Strong office skills and negotiating/influencing skills. high energy, great verbal and written skills (writing samples will be requested). knowledge of commercial cleaning or commercial real estate a plus Must have valid MN driver s License; mileage and related expenses covered.
For consideration, send a Word formatted resume and target salary to: xyz X@ All serious inquiries will receive a response. Send