Maintenance Mechanic | Hampton, VA

Construction/skilled trade jobs encompass a wide range of manual labor positions that are essential to the building and maintenance of infrastructure. These roles typically require specialized training and skills in areas such as carpentry, plumbing, electrical work, masonry, and welding. Workers in these fields are known for their hands-on expertise, physical stamina, and ability to solve complex problems on-site. Safety is paramount, and skilled tradespeople must adhere to strict regulations and standards to ensure their well-being and the quality of their work. These jobs are often in high demand due to the essential nature of construction and infrastructure development.

Construction/Skilled Trade Jobs encompass a wide variety of roles within the building and maintenance of structures and infrastructure. These positions often involve physical labor and require specialized skills or training, such as carpentry, plumbing, electrical work, welding, and masonry. Individuals in these fields typically work on construction sites, in residential and commercial buildings, or on roads and bridges. The work is hands-on and often takes place outdoors, demanding attention to safety, proficiency with tools and equipment, and sometimes, certification or apprenticeship credentials. The sector is known for its contribution to economic development and its demand for a workforce adept at problem-solving and craftsmanship.

fastening systems, titanium structural parts and forged wheels. With nearly 1,150 granted and pending patents, the Company's differentiated technologies promote more fuel efficiency for aircraft and commercial transportation. For more information, visit , including content shared during the Company's May 2022 Technology Day.

Follow: Linked In , Twitter , Instagram , Facebook , and You Tube. Howmet is proud to be an Equal Employment Opportunity and Affirmative Action employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate based upon race, religion, color, national origin, gender, interactionual orientation, gender

identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. If you need assistance to complete your application due to a disability, please email Talent Acquisition Co E_Howmet@Basic Requirements: Education: High school diploma or general education degree (GED) Experience : This position requires a minimum of two to four years-related gas tungsten ARC welding (GTAW and TIG) experience and/or training Employees must be legally authorized to work in the United States.

Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this

position. This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U.

S. person status. ITAR defines U. S. person as an U. S. Citizen, U. S. Permanent Resident (i. e. 'Green Card Holder'), Political Asylee, or Refugee. Basic Requirements: Education: High school diploma or general education degree (GED) Experience : This position requires a minimum of two to four years-related gas tungsten ARC welding (GTAW and TIG) experience and/or training Employees must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire. Visa sponsorship is not available for this position.

This position is subject to the International Traffic in Arms Regulations (ITAR) which requires U. S. person status. ITAR defines U. S. person as an U. S. Citizen, U. S. Permanent Resident (i. e. 'Green Card Holder'), Political Asylee, or Refugee. Description The HSC Welder will weld repair castings, caps, and core plugs that have surface or internal defects, which makes the casting unacceptable to the customer. The HSC Welder will perform the following duties: Operate and maintain welding table and argon purification equipment Produce NDT quality welds using.045" to.125" diameter weld wire for multiple alloys (Ti-6-4, Ti-2, IN718 etc.) Ability to mirror weld and produce NDT quality welds Review, maintain, and understand work instructions Measure, document and map welds Use and maintain the proper weld wire per alloy Perform necessary adjustments to the power source gauges.

Hold argon CFH from 5-30 CFH. Welding 70 - 150 AMP maximum, except for ECY 768 (125 amp max) Construct copper back-ups when necessary Record data either manually or by computer as required Must comply with all company attendance policies and guidelines; this includes, but is not limited to, regular attendance and occasional overtime Skills and Abilities: All Welders must meet the requirements of Activity Instructions 4000.205 and/or AMS 2694.

Must successfully pass the following welders certification test: Repair weld certification to ASME Boiler & PV Code Sec. IX and/or AMS 2694 Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.

Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; talk or hear; and taste or smell. The employee frequently is required to sit. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. Frequently the employee must lift and/or move up to 25 pounds and occasionally move with mechanical assistance up to or more than 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Equipment Used: Welding power source, gas tungsten arc, welding (gtaw) torches, argon purification equipment, welding shield, mirrors, coolant, and gloves. Description The HSC Welder will weld repair castings, caps, and core plugs that have surface or internal defects, which makes the casting unacceptable to the customer. The HSC Welder will perform the following duties: Operate and maintain welding table and argon purification equipment Produce NDT quality welds using.045" to.125" diameter weld wire for multiple alloys (Ti-6-4, Ti-2, IN718 etc.) Ability to mirror weld and produce NDT quality welds Review, maintain, and understand work instructions Measure, document and map welds Use and maintain the proper weld wire per alloy Perform necessary adjustments to the power source gauges.

Hold argon CFH from 5-30 CFH. Welding 70 - 150 AMP maximum, except for ECY 768 (125 amp max) Construct copper back-ups when necessary Record data either manually or by computer as required Must comply with all company attendance policies and guidelines; this includes, but is not limited to, regular attendance and occasional overtime Skills and Abilities: All Welders must meet the requirements of Activity Instructions 4000.205 and/or AMS 2694.

Must successfully pass the following welders certification test: Repair weld certification to ASME Boiler & PV Code Sec. IX and/or AMS 2694 Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; talk or hear; and taste or smell. The employee frequently is required to sit. The employee is occasionally required to stand; walk; climb or balance; and stoop, kneel, crouch, or crawl. Frequently the employee must lift and/or move up to 25 pounds and occasionally move with mechanical assistance up to or more than 100 pounds.

Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Equipment Used: Welding power source, gas tungsten arc, welding (gtaw) torches, argon purification equipment, welding shield, mirrors, coolant, and gloves.

Construction or skilled trade jobs encompass a range of manual labor positions that require specific training and skills to construct, maintain, and repair buildings, infrastructure, and machinery. These roles often include electricians, plumbers, carpenters, welders, and masons, among others. Characterized by hands-on work, these jobs are essential to the development and upkeep of our physical environment. Workers in this field typically have robust technical knowledge, a strong work ethic, and the ability to solve problems on-site. Many of these positions also offer the satisfaction of seeing tangible results from one's efforts.