Location: Eagle Lake, TX
Company: Kikiktagruk Inupiat
Control Manager to support Federal construction contracts in Attwater, TX and the surrounding area. This position may function in concurrent roles (on-site Superintendent and/or Site Safety and Health Officer). Duties/Responsibilities: Develop and implement project-specific quality control.
Inspect and evaluate the work area in accordance with plans, specifications, and contract documents, reporting deficiencies as appropriate and elevating issues as needed to ensure safe work practices and quality. Develop, gather, maintain, and/or submit work plans, submittals, reports, etc. Ensure that subcontractors are aware of all project quality control. Plan for and conduct a three-phase inspection
program to include: Preparatory Meetings and Reports; Initial Phase Inspections and Reports; Follow-up Inspections and Reports; and Final Phase Inspections and Lead and document quality control meetings with the project team and/or customers; and provide written minutes.
Provide daily quality control reports to achieve desired quality outcomes in a timely manner by reinforcing activities that are being constructed in conformance with project-specific standards; and constructively confront non-conformance. Verify and document that all materials/equipment received for the project are in conformance with the approved submittal, are handled and stored appropriately, and are acceptable for
use in the project, check for damaged and defective materials and address.
Schedule, coordinate, and document all required code and independent inspections. Clearly document, correct, and re-inspect all non-conformances prior to covering up work. Review the as-built drawings to ensure that they are current, and that deviations from the contract drawings. Review the Job Site Safety Plan, verify that a hazard analysis has been approved prior to the performance of a specific feature of work during the preparatory phase of control, verify that safety measures are in place during the initial phase of control, and conduct safety inspections during the follow-up phase of control.
Stop work; reject materials and/or equipment; and direct the removal and replacement of any work not in compliance with contract documents, applicable codes, building standards, and/or established principles of construction engineering, or activities which present life-threatening conditions or damage to the site. Communicate and interact as a team member with all trades, manufacturers, suppliers, construction staff and customer representatives, in a professional Other duties as required. Minimum Requirements: Bachelor's degree in construction management, construction science, engineering, or related field from an accredited university preferred.
Minimum of 5 years' experience in programs of similar size and scope. Current OSHA 30; First Aid/CPR; and USACE Construction Quality Control Management certifications; or ability to obtain within 30 days of hire. Exceptional communication skills (written and verbal); and ability to interact professionally with customers, coworkers, and subcontractors. Exceptional organizational and time management skills Proficient with Microsoft Office (Outlook, Excel, Word, Power Point, etc. ) and Procore. Familiar with USACE RMS CM and EM Must be able to pass all required contract security requirements.
Uncompromising Commitment To Safety Preferred Requirements: Experience in HVAC and/or Electrical Experience with ground up construction, civil, structural, and MEP finishes. Physical Requirements: Must be able to traverse job sites as needed for inspections of projects and backssing areas of construction, which includes but is not limited to, walking on uneven surfaces/multiple floors; climbing multiple flights of stairs; standing for extended periods of time; climbing ladders; and/or lifting to 50 lbs. There may be additional project-specific physical requirements.
Apply online at our website: kikiktagruk. / Disclaimer: This is not to be an exclusive list of all responsibilities, duties, and skills required of the person in this job. KIC is an Equal Opportunity Employer. KIC considers all applicants for employment without regard to race, color, interaction, national origin, religion, age, physical or mental disability, family responsibility, marital status, interactionual orientation, political affiliation, veteran's status, gender identity or any other legal protected status. Pursuant to The Alaska Native Claims Settlement Act 43 U.
S. C. Sec. 1601 et seq. and federal contractual requirements, Kikiktagruk Inupiat Corporation, may legally grant certain preference in employment opportunities to KIC Shareholders and their Descendants. EOE/AA/M/F/D/V. Please view Equal Employment Opportunity Posters provided by OFCCP here. Successful candidate must pass, comply and adhere to KIC's Drug and Alcohol policy/testing requirements and pass a thorough background check including fingerprinting.
issues with defective components. 4) Review non-conforming material and perform inspection/sorting as needed. 5) Perform corporate process audits, internal process audits, and product audits. 6) Perform scrap transactions in JD Edwards as required. 7) Measure parts utilizing various gauges including calipers, feeler gauge, and tape measure.
8) Identify parts by length, wood species, and profiles. 9) Communicate status of materials (accept, reject, hold) and audits to quality and production teams. 10) Maintain understanding of specifications online, SOP’s, and document control library. 11) Participate in quality projects as needed. 12) Demonstrate alignment with the CITE principles. 13)
Must be able to understand and follow general safety instructions for a manufacturing environment and any specific safety instructions for this position. 14) Complete cross-training requirements to be able to perform the essential functions of positions in client/provider departments.
15) Be present for regularly scheduled shift work. 16) Work together with team members to meet production goals. BASIC QUALIFICATIONS: 1) High school diploma or general equivalency degree (GED) is preferred. 2) Willing to work overtime with little or no notice. 3) Ability to function independently without direct supervision and as part of a team. 4) Ability to read, analyze, and interpret common business
documents such as but not limited to production reports, scheduling reports, standard work documents, etc.
Ability to listen and communicate effectively with co-workers. 5) Ability to apply basic mathematical concepts such as percentages, addition, subtraction, multiplication, and division. Other mathematical skills may be required. 6) Ability to define problems, collect data, establish facts, and draw reasonable conclusions through critical thinking skills. PHYSICAL AND OTHER REQUIREMENTS: 1) Must be able to walk and stand for most of the working day as needed. 2) Must be able to lift and carry weights up to 25 pounds / 12 kilograms as needed. 3) Must be able to spend most of the day in a production environment.
4) Must be able to wear protective equipment including safety goggles and hearing protection devices. Disclaimer: The above information in this description has been designed to indicate the general nature and level of work performed by employees within this job title. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. AN EQUAL OPPORTUNITY EMPLOYER The American Woodmark Corporation does not discriminate on the basis of race, color, national origin, ancestry, age, religion, military and veteran status, interaction, gender, gender identity, gender expression, interactionual orientation, genetic information, marital status, medical condition, pregnancy, or any other legally protected characteristic; and it will comply with all applicable state discrimination laws.
No person shall be denied employment solely because of any disability which is unrelated to the ability to engage in the essential functions involved in the position for which application has been made either with or without reasonable accommodations. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled
professionally to requests Continuously be involved in the Sprint activities in close coordination with the Sprint Testers to drive early engagement Validate what is being tested by the System Integrators, backss if the Sprint Deliverables can be integrated into the User's bigger picture requirements and determine what automated scripting/sprint deliverables can be transitioned to the later phases of testing (QT&E/OT&E) Be involved in the design, execution, continuous automation & reporting during the Functional Demos (EPICs) and final graduation exercise before OT (Mission Threads) Proactively communicate to internal and external customers, keeping them updated on progress and changes that may
affect them Prioritize issues and addresses most pressing concerns Maintain continuous, open, consistent professional communication with customers, peers and management Charged with a high degree of authority to interpret business rules and requirements for task completion Prepare, execute and automate test scripts for their assigned Sprint Team Identify test script issues and debug scripts Design, develop, and maintain automated testing framework Work closely with and advise Developers, Tester Analysts, as well as user community representatives Develop test scenarios and create & maintain test data Establish and share testing best practices, design and execute a robust test strategy Work in
a team environment for thorough understanding of design and architecture Required Qualifications: Must be a US Citizen 3+ years' experience in automated testing using tools such as: Silk, HP ALM, and/or OATS 3+ years' experience with common programming and scripting languages such as Microsoft.
NET Framework, Java Script, and/or Oracle Experience with required technologies such as Visual Studio, TFS /VSTS Experience working with Microsoft SQL Server 2012+ (T-SQL, Stored Procedures, SSRS, SSIS) Experience working in a virtual environment Proficient in Microsoft Office applications Education and Certification: Bachelor's Degree in Computer Science or Related Field of Study 3+ years of relevant work experience
bills of material, specifications, etc. ) in order to: Identify and resolve issues affecting product configuration Identify and assign rework actions necessary to rework production product Accept production product work-in-process and approve for next assigned operation Skills : Candidates must be able to work in a self directed manner in a fast-paced working environment Foster and maintain professional and productive relationships with other staff and management Possess excellent verbal and written communication skills Demonstrate proficiency in computer based applications Have experience with electronic assembly including; SMT, T/H & Mechanical Ability to effectively operate visual magnification
devices (scope) Ability to effectively operate and interpret basic electronic measuring devices Ability to effectively operate and interpret basic mechanical measuring devices Qualifications : High school diploma or equivalent required, some college preferred Basic math skills required Acceptable visual acuity and eye-hand coordination Must have, or be able to acquire, operator certification for IPC-A-610 Must have, or be able to acquire, operator certification for J-STD-001 Ability to review and interpret technical data packages for electronic assemblies Physical Demands : While performing these duties, the employee is required to sit or stand for extended periods of time, reach with hand and
arm, and talk or hear.
Employee may be required to lift up to 50 pounds.
This position may require exposure to information which is subject to US export control regulations, i. e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All applicants must be U. S. persons within the meaning of U. S. regulations. Job Posted by Applicant Pro
Automated Test Case Reporting Minimum 1 year experience in Requirements Traceability Matrix Creation and Maintenance Minimum 1 year experience in Test Coverage Tool 1 year experience in Salesforce 1 year experience in Agile, Scrum, and Jira Preferred CI/CD 1 year Experience Interested candidates can send their updated resumes at xyz X@global- Job Posted by Applicant Pro
