Press Operator | Asheboro, NC

General labor jobs encompass a range of manual labor positions that typically do not require specialized skills or extensive training. These roles can vary widely and may include tasks such as cleaning, lifting, basic construction, and maintenance work. A key characteristic of general labor jobs is their physical nature, often requiring strength, stamina, and the capacity to perform repetitive motions. These jobs are usually entry-level positions with on-the-job training, offering a starting point for individuals to enter the workforce. General laborers work in various settings, from warehouses and construction sites to road crews and manufacturing plants.

Make Ready the press Running for production - maintaining proper sheet registration and proper cut and scoring. Proper press maintenance and lubrication Required quality checklist Housekeeping & AIB Responsible for reporting Other duties as assigned QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must have excellent attendance, be able to work independently and be able to perform each essential duty satisfactorily.

The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. MECHANICAL SKILLS: Mechanically

inclined EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED)LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables

in situations where only limited standardization exists.

Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. ESSENTIAL JOB FUNCTIONS INCLUDE THE FOLLOWING: WORK SCHEDULE: Employees are required to work 8-hour (M-F) or 10-12-hour shift schedules including weekends. Occasional overtime is required to include 10 to 12 hour shifts. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms. The employee is occasionally required to walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee is frequently required to lift or carry 10 to 25 pounds and occasionally required to lift or carry 26 to 50 pounds. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is regularly exposed to dust, fumes, heat, cold, vibration, toxic conditions, and potential work hazards. The noise level in the work environment is usually loud. Personal Protective Equipment (hearing protection, safety glasses, safety shoes, hairnet) is required. Other PPE may be required for specific tasks, Prepare paperboard for cutter as needed, assist pressman on cutter as needed.

They understand and align business operations and the Department as he/she executes their role to exceed customer expectations and align with GPI business, cultural, financial and operational objectives. Primary Responsibilities are, but not limited to the following: Make Ready the press Running for production - maintaining proper sheet registration and proper cut and scoring. Proper press maintenance and lubrication Required quality checklist Housekeeping & AIB Responsible for reporting Other duties as assigned QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must have excellent attendance, be able to work independently and be able to perform each essential duty satisfactorily.

The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. MECHANICAL SKILLS: Mechanically inclined EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED)LANGUAGE SKILLS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.

Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

ESSENTIAL JOB FUNCTIONS INCLUDE THE FOLLOWING: WORK SCHEDULE: Employees are required to work 8-hour (M-F) or 10-12-hour shift schedules including weekends. Occasional overtime is required to include 10 to 12 hour shifts. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel objects, tools, or controls.

The employee frequently is required to reach with hands and arms. The employee is occasionally required to walk; climb or balance; and stoop, kneel, crouch, or crawl. The employee is frequently required to lift or carry 10 to 25 pounds and occasionally required to lift or carry 26 to 50 pounds. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works near moving mechanical parts. The employee is regularly exposed to dust, fumes, heat, cold, vibration, toxic conditions, and potential work hazards. The noise level in the work environment is usually loud. Personal Protective Equipment (hearing protection, safety glasses, safety shoes, hairnet) is required. Other PPE may be required for specific tasks, Nearest Major Market: Greensboro

General labor jobs encompass a variety of entry-level positions that typically require physical work and may not demand specialized skills or education. These roles are often found in industries such as construction, manufacturing, warehousing, and maintenance. Key characteristics of general labor jobs include manual tasks such as lifting, moving materials, cleaning, and assisting skilled workers. The jobs can provide flexibility with part-time, temporary, or seasonal employment options, and are prized for offering hands-on experience, potential for skill development, and opportunities for advancement within a company.

last night. We're one of the largest manufacturers of paperboard and paper-based packaging for some of the world's most recognized brands of food, beverage, foodservice, household, personal care and pet products. Headquartered in Atlanta, Georgia, we are collaborative, diverse, innovative individuals who create inspired packaging while giving back to our communities.

With over 25,000 employees working in more than 130 locations worldwide, we strive to be environmentally responsible in our industry and in the communities where we operate. We are committed to workplace diversity and offer compensation and benefits programs that are among the industry's best to reward the talented people

who make our company successful. If this sounds like something you would like to be a part of, we'd love to hear from you. A World of Difference. Made Possible. Provides leadership to the supervisory team, production work teams and is a member of the site leadership team reporting directly to the Plant Manager.

Facilitates department meetings, intervenes as necessary to keep the goals and results consistent with company direction, and works with the supervisory team members to develop their full potential. The Printing Manager, in conjunction with the team, is responsible for safety, quality, productivity, equipment condition, and housekeeping. JOB FUNCTIONS include but are not limited

to the following: Manages and facilitates the long-term goals of the printing and sheeting department.

Utilizes knowledge and experience, providing training to supervision. Responsible for their individual performance as well as resolving production problems. Helps department achieve goals and has responsibility for personnel issues, including required discipline. Provides a communication network between direct reports and upper management. Works with all employees to maintain a safe work environment. Encourages and leads department to work in a safe manner and to seek improvement in work practices for their benefit. Develops and implements safety procedures and partners with the Safety Coordinator in achieving departmental and plant safety goals.

Assures that the department maintains quality standards and uses SPC techniques for problem resolution through knowledge of product specifications and training of personnel. Ensures that product quality, production efficiencies, and overall productivity meet or exceeds established standards, and is directly accountable for expenditures exceeding budgeted levels. Strives to be technically proficient on the machinery in the department. Provides assistance to the team in problem resolution and assures that testing and product development is carried out in a professional manner.

Works effectively with other department managers to resolve issues and coordinate efforts to achieve stated goals. BACKGROUND / EXPERIENCE: The Manager must be a leader with exceptional communication skills, good organization, and the ability to motivate people to perform at high levels. 7-10 years production experience in printing is required and continued education is considered a plus. Must be quality conscious and customer oriented. Experience working in a non-union environment. Experience in Lithographic Printing.

Experience working with Manroland and Heidelberg printing press. EDUCATION / KNOWLEDGE: A four-year college degree is preferred with equipment-direct experience in the folding carton industry. Compensatory closely related work experience required in lieu of degree. LEADERSHIP SKILLS: Action Oriented / Drive for Results Dealing with Ambiguity Customer Focus Functional / Technical Skills Perseverance Planning and Priority Setting Problem Solving Composure Decision Quality Integrity and Trust Conflict Management Timely Decision Making Total Work Systems Approachability Managerial Courage Intellectual Horsepower Written Communication Ethics and Values Interpersonal Savvy Process Management Drive for Results SCHEDULE DEMANDS: General schedule is an 8-hour M-F assignment, typically (7:30 am - 4:30 pm), however, employee must be willing to work alternate schedules occasionally; that may include early mornings, nights, and/or weekends and be punctual while doing so.

Occasional overnight travel to include flying, driving, riding or by rail. PHYSICAL DEMANDS: Sitting or standing for extended periods of time up to 8 hours. Occasional Lifting up to 20 lbs. Reading computer screen or other electronic devices.

Use of various office hand and electrical tools or equipment. GRAPHIC PACKAGING INTERNATIONAL is an Equal Opportunity Employer. All candidates will be evaluated on the basis of their qualifications for the job in question. We do not base our employment decision on an employee's or applicant's race, color, interaction, age, religion, natural origin, interactionual orientation, citizenship, handicap, or disability, marital status, veteran status or any other basis prohibited by local, state, or federal law. Nearest Major Market: Charlotte