Construction Laborers | Greenwood, IN

team player with the ability to easily network in an international and cross-cultural environment, working in line with Alfa Laval drivers; Action, Interaction, and Satisfaction. You are driven and see solutions rather than problems, effectively prioritizing and executing tasks.

You build trust, by clear communication with no prestige. If the above sounds like you, this position might be just what you’re looking for! This position performs equipment receipt, inspection, repair, testing and packaging following the company’s quality standards, SOPs and safety guidelines. This position also disassembles PHEs, cleans and rebuilds to new standard. Expectations & Responsibilities: Receives,

counts, verifies, labels and stores all parts Uncrates, removes gaskets, disassembles For glued gaskets - puts plate on hook, submerges in liquid nitrogen, after removed, stacks plates on skid in preparation for chemical dip Fills out Preliminary, Actual, Final Inspection reports and reads PLA/Drawings as job moves through shop Dyes penetration inspection process - takes plate into room, sprays die on one side and inspects under black light for holes, cracks or other irregularities in plates.

Rinses remaining dye from plates Cleans units (pressure wash), paints if specified Installs new gaskets per specification (glue, snap or clip) For glued gaskets – glues gaskets to plate and

tapes in place, moves to cure oven, posts cure, inspects and removes tape, stacks plates for assembly either configure per specification for plate packs or assembles to frame per drawing For clip or snap on – assures gasket is secure - stacks plates for assembly either configures per specification for plate packs or assembles to frame per drawing Recognizes and communicates the need for replenishment of supplies, tools, along with the need for repair parts and other facility needs to supervision in a timely manner Directly responsible for keeping work area and surrounding equipment clean and organized.

Performs housekeeping as required at the facility to maintain a professional presentation – (follows 5S standards) Uncrates as necessary to add additional items for customer as directed by Capital Sales Uncrates customer supplied parts and assembles or repackages as necessary for shipping or customer pick-up Picks up/Deliver Customer Equipment every couple months/as necessary Responsible for shipping, receiving, distribution of Alfa Laval and customer equipment Actively participates in daily ALPS meeting Knowledge, Skills & Abilities of the Successful Candidate: High School diploma or Equivalent Experience in a manual shop environment, preferred but not necessary Experience operating fork lift trucks, hand pallet jacks and overhead cranes, preferred Able to use measuring devices (tape measure, depth micrometer) as required Good hand eye coordination Flexible, Team Player Clocking in and out, scanning bar codes, taking photos What’s in it for you?

We offer a challenging position in an open and friendly environment where we help each other to develop and create value. Your work will have a true impact on Alfa Laval’s future success. Our benefits-eligible associates enjoy healthcare, dental and vision plans, a robust wellness program, generous retirement savings program, paid holidays, paid time off benefits, and more.

EEO/Vet/Disabled Employer

Construction/Skilled Trade Jobs encompass a variety of roles focused on building, maintaining, and repairing structures and infrastructure. This sector includes carpenters, electricians, plumbers, welders, and more, each requiring specialized skills and training. Such jobs are often hands-on and require physical labor. Workers in these fields typically work on construction sites, in homes, or on roads and can expect to operate tools and machinery specific to their trade. Safety is a top priority due to the potential hazards associated with construction environments. These roles are essential in shaping the built world and tend to offer opportunities for on-the-job learning and career progression.

Construction/Skilled Trade Jobs encompass a wide variety of roles within the building and maintenance of structures and infrastructure. These positions often involve physical labor and require specialized skills or training, such as carpentry, plumbing, electrical work, welding, and masonry. Individuals in these fields typically work on construction sites, in residential and commercial buildings, or on roads and bridges. The work is hands-on and often takes place outdoors, demanding attention to safety, proficiency with tools and equipment, and sometimes, certification or apprenticeship credentials. The sector is known for its contribution to economic development and its demand for a workforce adept at problem-solving and craftsmanship.

end of shift checks and maintenance on equipment Perform assigned plant rounds; inspect, monitor, troubleshoot, performance test and document plant processes.

Operate and adjust treatment plant pumps, motors, feeders and other equipment to maintain appropriate plant operations.

Maintain plant maintenance including but not limited to daily shoveling, sweeping, general plant housekeeping, and any necessary repairs or services to mobile and stationary equipment Use gas or electrical welding equipment to weld, braze, and or cut Perform needed hot work, including welding and cutting Determine proper rod selection for welding either ferrous or non-ferrous material Must have the ability

to fabricate components from instructions on blueprints Have the ability to troubleshoot and/or repair bearings, speed reducers, shafts, pulleys, couplings, sheaves, and belts Have the ability to troubleshoot and/or repair crushing, screening, and conveying equipment Maintain plant maintenance including but not limited to daily shoveling, sweeping, general plant housekeeping, and any necessary repairs or services to mobile and stationary equipment.

Report orally and in writing to as required and maintain accurate records (i. e. activity reports, inventory reports, maintenance logs, etc. ) as directed. Participate in general training, job specific training and hazardous materials training

as required; successfully complete written examinations as required.

Understand and follow all policies, procedures and safety rules as applicable to facility, job function and equipment. Ensure the proper safety incident procedures and reporting processes are followed, bringing safety concerns to the attention of the Plant Manager Communicate with management and staff on conditions of stationary and mobile equipment, as well as any possible improvements or ideas Operate plant when necessary Requirements: Ability to service all stationary equipment units with the help of service and OEM manuals Must have the skills and safety mindset to work in close proximity with Crane and Boom trucks MSHA certified, part 46 preferred Experience in mining industry with some knowledge of proper use of equipment, materials and supplies used in mining is preferred Ability to be trained to complete tasks in a safe and effective manner Use gas or electrical welding equipment to weld, braze, and or cut Determine proper rod selection for welding either ferrous or non-ferrous material Must have the ability to fabricate components from instructions on blueprints Have the ability to repair bearings, speed reducers, shafts, pulleys, couplings, sheaves, and belts Have the ability to repair crushing, screening, and conveying equipment Must maintain regular, dependable attendance and a high level of performance Follow written and verbal directions to complete assigned tasks on schedule.

Read, write, and communicate in English & understand basic math. Complete all applicable documentation, recordkeeping and daily inventory. Participate in safety briefings, job briefings, and any other pass on information from team members, management or customer. Must be able to work with a team, take direction and follow work rules, as well as, take on additional job responsibilities as needed or assigned.

Flexibility required; ability to work days, nights, weekends. Flexibility and willingness to travel and work at other US Aggregates locations as needed. Perform all work in compliance with Company standards, procedures, and regulatory requirements. Self-motivation and team orientation Problem solving skills Computer skills, including experience in Excel and other Microsoft Office software. High school diploma or equivalent Perform other duties as assigned Physical Requirements: Must have the ability to continuously stand or walk on level or uneven ground. Must have the ability to ascend and descend ladders, stairways and incline catwalks.

Must have the ability to bend, crouch and/or kneel at waist or knees. Must have the ability to lift, push, pull, or carry up to 50lbs. Ability to work outside majority of the time and withstand extreme weather conditions. Exposure to hot, cold, wet, humid, or windy conditions caused by the weather. EOE/M/W/Vet/Disabled/PDA #USAGG